Talent.com
Manufacturing Tech I - 2nd Shift

Manufacturing Tech I - 2nd Shift

Plasma-Therm LLCSaint Petersburg, FL, US
job_description.job_card.30_days_ago
serp_jobs.job_preview.job_type
  • serp_jobs.job_card.full_time
job_description.job_card.job_description

Job Description

Job Description

Description : SUMMARY :

  • This position is for 2nd Shift Only (3 : 00 - 11 : 30PM)
  • Training will start on first shift (7AM - 3 : 30PM) for the first 4-6wks.

Facilitates, sets up, build, calibrates, tests and breakdown of plasma processing equipment and records results.

DUTIES AND RESPONSIBILITIES :

NOTE : The Manufacturing Technician I performs all duties of Assembly Technician III, and performs the following duties on a limited range of products and equipment, Work is performed under general or close supervision.

  • Facilitates equipment applying, water, electrical power and leveling machinery in temporary installation
  • Positions and assembles complex Electro / mechanical parts and assemblies part according to blueprints, schematics and / or standard procedures
  • Assembles parts using bolts, screws, speed clips, rivets, or other fasteners, using hand tools
  • Performs complex mechanical alignments and calibration of equipment to the quality standards of ATP (Acceptance Test Procedure) and other procedures that are used during the test cycle of the products
  • Performs leak checks on vacuum and mechanical assemblies using leak detection systems
  • Debugs and test equipment, including electrical, mechanical, and vacuum systems, gathering of test data. Records and reports test data
  • The ability to operate impedance meters and other specializes electronic test equipment
  • Prepares systems for shipment, including cleaning, break down of machinery facilities, preparation of miscellaneous list, and interfacing with Shipping
  • Maintains Class 10,000 and 1,000 clean room requirements
  • It is every employee’s responsibility to be aware of and adhere to the applicable Safety & Health, Quality and Environmental Process of Plasma-Therm, LLC.

    • SUPERVISORY RESPONSIBILITIES : None

    Requirements : QUALIFICATIONS :

  • Associate’s Degree from two-year college or technical school or military education, or relevant experience
  • One to three years of directly related experience as a technician

    • SKILLS AND ABILITIES :

  • Ability to interpret blueprints drawings, schematics, technical procedures, and other related material
  • Ability to read, interprets, and follows safety rules, operating and maintenance instructions, and procedure manuals
  • Ability to follow written and verbal directions to perform to the quality standards
  • Ability to apply basic mathematical skills to solve technical problems
  • Proficient in use of crimpers, torque wrenches, vacuum leak detectors, soldering irons, and other assembly hand tools
  • Working knowledge of Windows Office

    • WORK ENVIRONMENT and PHYSICAL DEMANDS :

  • The normal work environment is typical of manufacturing clean room facility and support areas such as stockroom, machine shop, and laboratory.
  • The incumbent is routinely required to sit, stand, walk, stoop, kneel, touch, see, and hear, and may be required to lift or move up to 50 pounds.
  • While performing the regular duties of the position, the incumbent is regularly exposed to moving mechanical parts, risk of electrical shock, and possible exposure to toxic or caustic chemicals. The incumbent must be able to wear safety equipment and follow safety instructions.

    • Plasma-Therm is an equal employment opportunity employer, in accordance with applicable federal and state laws for qualified employees and applicants without regard to race, religion, color, sex, age, national origin, sexual orientation, gender identity, marital status, genetic information, protected veteran or disability status. When requested and necessary, we provide reasonable accommodations for qualified individuals with disabilities.

    serp_jobs.job_alerts.create_a_job

    Manufacturing Tech • Saint Petersburg, FL, US

    Job_description.internal_linking.related_jobs
    • serp_jobs.job_card.promoted
    Warehouse Shift Manager - 2nd shift

    Warehouse Shift Manager - 2nd shift

    AMERICAN METALS SUPPLY LLCTampa, FL, United States
    serp_jobs.job_card.full_time
    American Metals Supply is a growing metals distributor servicing the southeastern part of the USA with offices located in Tampa, FL. Company was formed by a highly experienced group of people with m...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Manufacturing Technician Core Blue Light 1st Shift (P)

    Manufacturing Technician Core Blue Light 1st Shift (P)

    Siemens EnergyGibsonton, FL, US
    serp_jobs.job_card.full_time
    Will be measuring Cores to ensure dimensional acceptance for mold processing.Participating in training and cross training in production areas. Following work instructions to inspect and produce part...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Manufacturing Technician Core Borescope 3rd Shift(P)

    Manufacturing Technician Core Borescope 3rd Shift(P)

    Siemens EnergyGibsonton, FL, US
    serp_jobs.job_card.full_time
    You will be working with visual inspection of various components utilizing a borescope unit.Operators conduct visual inspection in accordance with component work orders and indication maps.Visual i...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Manufacturing Technician Rough Special Process - 1st Shift (P)

    Manufacturing Technician Rough Special Process - 1st Shift (P)

    Siemens EnergyGibsonton, FL, US
    serp_jobs.job_card.full_time
    Will be working with core material from the inside of the castings, loading and unloading parts into core removal baskets. Will be flushing parts and monitoring core removal cycle performance using ...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Manufacturing Technician - Mold Prep - 2nd Shift (P)

    Manufacturing Technician - Mold Prep - 2nd Shift (P)

    Siemens EnergyGibsonton, FL, US
    serp_jobs.job_card.full_time
    As part of the manufacturing process will be weighing, bore scoping, washing, patching, wrapping, and doing inspections of DS molds in our Gibsonton Florida location.How You’ll Make an Impact...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Manufacturing Tech II

    Manufacturing Tech II

    Plasma-Therm LLCSaint Petersburg, FL, US
    serp_jobs.job_card.full_time
    Facilitates, sets up, builds, calibrates, tests, and breakdown of plasma processing equipment and records results.NOTE : The Manufacturing Technician II performs all duties of Manufacturing Technici...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Manufacturing Technician Core Borescope 2nd Shift(P)

    Manufacturing Technician Core Borescope 2nd Shift(P)

    Siemens EnergyGibsonton, FL, US
    serp_jobs.job_card.full_time
    You will be working with visual inspection of various components utilizing a borescope unit.Operators conduct visual inspection in accordance with component work orders and indication maps.Visual i...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    Manufacturing Tech III

    Manufacturing Tech III

    Plasma-ThermSt. Petersburg, Florida, United States
    serp_jobs.job_card.full_time
    serp_jobs.filters_job_card.quick_apply
    Facilitates set up, builds, calibrates tests, process test and breakdown of plasma processing equipment and records results. The Manufacturing Technician III performs all duties of Manufacturing Tec...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Manufacturing Technician Wax Ultrasonic Testing 2nd Shift (P)

    Manufacturing Technician Wax Ultrasonic Testing 2nd Shift (P)

    Siemens EnergyGibsonton, FL, US
    serp_jobs.job_card.permanent
    Will be testing wax patterns to ensure dimensional acceptance for mold processing.Participating in training and cross training in production areas. Inspecting and producing parts of exceptional qual...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_variable_days
    • serp_jobs.job_card.promoted
    Manufacturing Supervisor (3rd Shift)

    Manufacturing Supervisor (3rd Shift)

    1007 Clarios, LLCTampa, FL, United States
    serp_jobs.job_card.full_time
    Manufacturing Supervisor (3rd Shift).The Manufacturing Supervisor is responsible for ensuring that production requirements are met, appropriate staffing levels are maintained, employee relations ar...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_variable_days
    • serp_jobs.job_card.promoted
    Manufacturing Technician V

    Manufacturing Technician V

    Plasma-Therm LLCSaint Petersburg, FL, US
    serp_jobs.job_card.full_time
    Sets up, calibrates, and tests plasma processing equipment and records results.Provides technical team leadership to ensure integration and test tasks are completed defect-free and on time, and tha...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Manufacturing Technician Bench 2nd Shift (P)

    Manufacturing Technician Bench 2nd Shift (P)

    Siemens EnergyGibsonton, FL, US
    serp_jobs.job_card.full_time
    Will perform operations on castings for surface preparation such as blasting, belting, grinding, and benching according to production specifications to produce parts of exceptional quality in the G...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Manufacturing Technician Core Finishing 1st Shift (P)

    Manufacturing Technician Core Finishing 1st Shift (P)

    Siemens EnergyGibsonton, FL, US
    serp_jobs.job_card.full_time
    Will be using different tools such as files, ultrasonic machines, and sandpaper.As well as patching cores using an alumina-based material according to work instructions in the Gibsonton, Florda loc...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    1st shift Maintenance Technician, Manufacturing

    1st shift Maintenance Technician, Manufacturing

    ICP GroupTampa, FL, US
    serp_jobs.job_card.full_time
    Innovative Chemical Products Group (ICP Group) is a leading formulator and manufacturer of specialty coatings, adhesives, and sealants serving the construction and industrial end markets.ICP Group ...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_variable_days
    • serp_jobs.job_card.promoted
    Manufacturing Technician - Rough Special Process 3rd Shift (P)

    Manufacturing Technician - Rough Special Process 3rd Shift (P)

    Siemens EnergyGibsonton, FL, US
    serp_jobs.job_card.full_time
    In this role, you’ll lead by driving manufacturing and repair processes, development, and improvement projects, and collaborating with combustion design and repair engineering groups to innov...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Material Specialist 1st shift

    Material Specialist 1st shift

    GE AerospaceClearwater Beach, FL, US
    serp_jobs.job_card.full_time
    Join our team as a Stockroom Specialist where precision meets purpose! Are you ready to be the backbone of a dynamic manufacturing operation? As a Stockroom Specialist, you'll play a pivotal role ...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_variable_days
    • serp_jobs.job_card.promoted
    Manufacturing Technician IV

    Manufacturing Technician IV

    Plasma-Therm LLCSaint Petersburg, FL, US
    serp_jobs.job_card.full_time
    Sets up, calibrates, and tests plasma processing equipment and records results.Provides technical team leadership to ensure integration and test tasks are completed defect-free and on time, and tha...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Manufacturing Tech III

    Manufacturing Tech III

    Plasma-Therm LLCSaint Petersburg, FL, US
    serp_jobs.job_card.full_time
    Facilitates sets up, builds, calibrates tests, process test and breakdown of plasma processing equipment and records results. NOTE : The Manufacturing Technician III performs all duties of Manufactur...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Manufacturing Technician Core X-Ray 3rd Shift (P)

    Manufacturing Technician Core X-Ray 3rd Shift (P)

    Siemens EnergyGibsonton, FL, US
    serp_jobs.job_card.full_time
    You will be part of the manufacturing process that will result in the production of quality castings in the Gibsonton Florida location. Our Gas Services division offers Low-emission power generation...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Manufacturing Technician Wax - Core Prep 2nd Shift

    Manufacturing Technician Wax - Core Prep 2nd Shift

    Siemens EnergyGibsonton, FL, US
    serp_jobs.job_card.full_time
    Will be working with cores to get them ready for injection in the Gibsonton Florida location.How You’ll Make an Impact.Inspect cores after completion to ensure that the cores have acceptable ...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30