Talent.com
serp_jobs.error_messages.no_longer_accepting
Assembly Technician - 2nd Shift Only

Assembly Technician - 2nd Shift Only

Daimler Truck North AmericaHigh Point, NC, US
job_description.job_card.variable_days_ago
serp_jobs.job_preview.job_type
  • serp_jobs.job_card.full_time
job_description.job_card.job_description

Job Description

Inside the Role

Perform physically demanding manufacturing duties including repetitive processes, moderate to heavy lifting, the use of machinery and following standardized work procedures at workstation or line assembly operations to mass-produce bus components or to assemble those components into a completed bus.

Posting Information

We provide a scheduled posting end date to assist our candidates with their application planning. While this date reflects our latest plans, it is subject to change, and postings may be extended or removed earlier than expected.

We Take Care of Our Team

Assembler position offers a starting salary of $20.96 / hr.

  • additional 7.5% shift differential for off-shifts

Benefits include; 401k with company match, retirement pension, full coverage benefit plan options, paid vacation (up to 5 weeks), 15 calendar holidays, paid sick / disability leave (including sick days), employee assistance program; comprehensive health and wellness programs (including no cost wellness clinic for employee and covered dependents), and tuition assistance.

What You Drive at DTNA

\n

  • Use hand tools, adhesive dispensing equipment, forming machines, fixtures and / or end effectors to complete mechanical, electrical and structural assemblies and sub-assemblies on buses.
  • \n

  • Install and assemble components for buses, use computer systems to access company data associated with assembly process, utilize drawings, bills of materials and specification sheets in both electronic and hard copy
  • \n

  • Complete tasks as directed by manufacturing schedules with minimum supervision
  • \n

  • Maintain the work area and equipment in a clean and orderly condition.
  • \n

  • Follow prescribed safety protocols.
  • \n

  • Work in a LEAN manufacturing environment and employ continuous improvement on a daily basis.
  • \n

  • Perform preventative maintenance on tools and equipment as required.
  • \n

  • Kitting of products, material and supplies
  • \n \n

    Knowledge You Should Bring

    \n

  • Attached resume required
  • \n

  • Must work successfully in a team environment.
  • \n

  • Must have good command of the English language, both written and verbal
  • \n

  • Able to work during 3rd shift
  • \n \n

    Exceptional Candidates Might Have

    \n

  • Manufacturing assembly / production experience a plus.
  • \n

  • High School Diploma is preferred
  • \n

  • Basic computer skills are preferred.
  • \n \n

    Where We Work

    This position is open to applicants who can work in (or relocate to) the following location(s)-

    High Point, NC US. Relocation assistance is not available for this position.

    Schedule Type : Onsite

    At Daimler Truck North America, we recognize our world is changing faster than ever before. By listening to the needs of today, we're building to solve with cutting-edge solutions in sustainability and future driving technology across electric, hydrogen and autonomous. These solutions, backed by years of innovative success and achievement, continue DTNA's legacy as the undisputed industry leader. Our evolving brand portfolio is second to none, including Freightliner Trucks, Western Star, Demand Detroit, Thomas Built Buses, Freightliner Custom Chassis, and Financial Services. Together, we work as one team towards our envisioned future - building a cleaner, safer and more efficient tomorrow for all.

    That is what we are working toward - for all who keep the world moving.

    Additional Information

    \n

  • This position is not open for Visa sponsorship or to existing Visa holders
  • \n

  • Applicants must be legally authorized to work permanently in the country the position is located in at the time of application
  • \n

  • Final candidate must successfully complete a criminal background check
  • \n

  • Final candidate may be required to successfully complete a pre-employment drug screen
  • \n

  • Contractors, professional services, or other contingent workers should confirm with their local agency if they are eligible to apply for FTE positions
  • \n

  • EEO - Disabled / Veterans
  • \n \n

    Daimler Truck North America is committed to workforce inclusion and providing an environment where equal employment opportunities are available to all applicants and employees without regard to race, color, sex (including pregnancy), religion, national origin, age, marital status, family relationship, disability, sexual orientation, gender identity and expression (including transgender and transitioning status), genetic information, or veteran status.

    For an accommodation or special assistance with applying for a posted position, please contact our Human Resources department at 503-745-8982 or toll free 800-206-3369. For TTY / TDD enabled call 503-745-2137 or toll free 866-355-6935.

    serp_jobs.job_alerts.create_a_job

    Assembly 2Nd Shift • High Point, NC, US

    Job_description.internal_linking.related_jobs
    • serp_jobs.job_card.promoted
    Maintenance Technician 2nd Shift and 3rd Shift

    Maintenance Technician 2nd Shift and 3rd Shift

    SouthCorr Packaging, LLCAsheboro, NC, US
    serp_jobs.job_card.full_time
    Adhere to all company safety regulations and current knowledge of safety procedures required (e.Required skills including mechanical, electrical, pneumatic, hydraulic and simple electrical troubles...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    1st Shift General Labor

    1st Shift General Labor

    UFP IndustriesSalisbury, NC, US
    serp_jobs.job_card.full_time
    General labor is responsible for safely handling lumber products.Verifies material meets customer requirements and company expectations. Principle Duties and Responsibilities.Moves and secures lumbe...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    2nd shift Round Mold Operator

    2nd shift Round Mold Operator

    Leggett & PlattSalisbury, NC, US
    serp_jobs.job_card.full_time
    serp_jobs.filters_job_card.quick_apply
    We, at LPFP - Salisbury, a Leggett & Platt company, are searching for a 2 nd shift Round Mold Operator to join our production team in our Mold Department. We have been manufacturing carpet under...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Maintenance Technician

    Maintenance Technician

    WestRockWinston-Salem, NC, US
    serp_jobs.job_card.full_time
    Smurfit Westrock (NYSE : SW) is a global leader in sustainable paper and packaging solutions.We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a sh...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_variable_days
    • serp_jobs.job_card.promoted
    1st shift Operator I (Monday-Friday 7 : 00am-3 : 00pm)

    1st shift Operator I (Monday-Friday 7 : 00am-3 : 00pm)

    Charter Medical LLCWinston-Salem, NC, US
    serp_jobs.job_card.full_time
    Work Instructions (WI), Visual Inspection Criteria, Standard Operating Procedures (SOP), and internal specifications in an FDA regulated environment. There are four (4) levels within this position, ...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    1st Shift Stacker

    1st Shift Stacker

    UFP IndustriesSalisbury, NC, US
    serp_jobs.job_card.full_time
    General labor is responsible for safely handling lumber products.Verifies material meets customer requirements and company expectations. Principle Duties And Responsibilities.Moves and secures lumbe...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    Production Technician (Manufacturing) (Afternoon or Overnight Shift) Immediate Need!!

    Production Technician (Manufacturing) (Afternoon or Overnight Shift) Immediate Need!!

    Axalta Coating SystemsUSA, North Carolina, High Point
    serp_jobs.job_card.full_time
    Important : We are seeking candidates with at least.Operators, Assembly Line, Production, etc.Forklift experience is a plus, but not necessary. CHEMICALS EXPERIENCE IS A HUGE PLUS!.Shift : We are seek...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    3rd shift Operator I (Sunday-Thursday 11 : 00 pm-7 : 00 am)

    3rd shift Operator I (Sunday-Thursday 11 : 00 pm-7 : 00 am)

    Charter Medical LLCWinston-Salem, NC, US
    serp_jobs.job_card.full_time
    Work Instructions (WI), Visual Inspection Criteria, Standard Operating Procedures (SOP), and internal specifications in an FDA regulated environment. There are four (4) levels within this position, ...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    • serp_jobs.job_card.new
    Maintenance Technician II - 2nd Shift

    Maintenance Technician II - 2nd Shift

    Hanes CompaniesWinston-Salem, NC, US
    serp_jobs.job_card.full_time
    Maintenance Technician II is responsible for maintaining all Hanes Dye and Finishing, Geo Components, and facility equipment. This role is responsible for completing projects, rebuilding parts, and ...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_variable_hours
    • serp_jobs.job_card.promoted
    Production Assistant 2nd and 3rd Shift

    Production Assistant 2nd and 3rd Shift

    SouthCorr Packaging, LLCAsheboro, NC, US
    serp_jobs.job_card.full_time
    Come Join a Winning Team at DS Smith Asheboro.The Production Assistant position is an entry level position with a starting wage of $20 per hour. The work schedule is 5 day work week regular 8 hours ...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    2nd Shift - Automated Machine Operator

    2nd Shift - Automated Machine Operator

    NordfabThomasville, NC, US
    serp_jobs.job_card.full_time
    Nordfab, LLC is an industry leading industrial duct manufacturer that introduced Quick-FitTM clamp-together ductwork in 1990 and serves as the world’s largest industrial supplier of clamp-tog...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Maintenance Technician Level III 2nd shift

    Maintenance Technician Level III 2nd shift

    Banknote Corp of AmericaBrowns Summit, NC, US
    serp_jobs.job_card.full_time
    PRINCIPAL FUNCTIONS OF THE DEPARTMENT : .We are seeking a dedicated Drives Maintenance Technician to join our Maintenance Department. This role focuses on the maintenance, troubleshooting, and repair ...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_variable_days
    • serp_jobs.job_card.promoted
    2nd shift Maintenance Mechanic

    2nd shift Maintenance Mechanic

    Leggett & PlattSalisbury, NC, US
    serp_jobs.job_card.full_time
    We, at LPFP - Salisbury, a Leggett & Platt company, are searching for a.Maintenance Mechanic Technician.We have been manufacturing carpet underlay for over 22 years and are considered a full-sc...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Maintenance Technician (Day and Night Shift Available) - Eden, NC

    Maintenance Technician (Day and Night Shift Available) - Eden, NC

    SignodeEden, NC, US
    serp_jobs.job_card.full_time
    With over $2B in revenue, 80+ manufacturing facilities across 6 continents and over 9,000 employees worldwide, Signode is a leading manufacturer of a broad spectrum of transit packaging consumables...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    • serp_jobs.job_card.new
    Maintenance Technician II - 1st Shift

    Maintenance Technician II - 1st Shift

    Hanes CompaniesWinston-Salem, NC, US
    serp_jobs.job_card.full_time
    Maintenance Technician II is responsible for maintaining all Hanes Dye and Finishing, Geo Components, and facility equipment. This role is responsible for completing projects, rebuilding parts, and ...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_variable_hours
    • serp_jobs.job_card.promoted
    Manufacturing Technician

    Manufacturing Technician

    Apple RockGreensboro, NC, US
    serp_jobs.job_card.full_time
    If you are a hardworking, enthusiastic and creative individual interested in working for a leading national display company, we would like to hear from you. Apple Rock provides excellent training, b...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Fabrication Associate I & II

    Fabrication Associate I & II

    Agility Fuel Systems LLCSalisbury, NC, US
    serp_jobs.job_card.full_time
    LASER, PRESS BRAKE 4 AXIS, TUBE BENDER (ROBOT), TRANSFLUID & SAW OPERATORS!!!!.Fabricate the energy transition.Driving energy transformation is critical to reducing climate change.To limit clim...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    2nd Shift Inspector

    2nd Shift Inspector

    Staffing LogisticsWinston-Salem, NC, US
    serp_jobs.job_card.full_time
    We are currently seeking a reliable candidate.Inspector position for our client located in Winston-Salem, NC!.Essential Functions and Key Result Areas : . Keep the area around the machine clean and sa...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    • serp_jobs.job_card.new
    Machinist 1st or 2nd shift

    Machinist 1st or 2nd shift

    Hanes CompaniesHigh Point, NC, US
    serp_jobs.job_card.full_time
    We are seeking a highly skilled manual.This role is critical to our manufacturing processes, the maintenance of textile machinery used to make industrial fabrics and should work well under minimal ...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_variable_hours
    Sign Assembler

    Sign Assembler

    Precision Fabrication IncHigh Point, North Carolina, United States
    serp_jobs.job_card.full_time
    serp_jobs.filters_job_card.quick_apply
    Applicant will be responsible for completion of metal sign assembly, such as preparing for shipment, installing LED lights inside of fabricated sign, installing trim work, etc.Lots of different asp...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30