Engineer Metrology 2 / 3

Requisition ID : R10181415

Category : Engineering

Location : Clearfield, Utah, United States of America

Clearance Type : Secret

Telecommute : No - Teleworking not available for this position

Shift : 1st Shift (United States of America)

Travel Required : Yes, 10% of the Time

Relocation Assistance : Relocation assistance may be available

Positions Available : 1

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history.

Northrop Grumman, Aeronautics Systems sector, has an opening for a Tooling Engineer - Metrology Engineer to join our team of qualified, diverse individuals. This position will be located in Clearfield, UT.

This position will be responsible for activities and knowledge within multiple disciplines across the Tooling / Manufacturing process.

Develops and evaluates metrology systems that measure characteristics of objects such as length and volume as relating to industrial metrology needed for industrial production and process control. Identifies magnitude of error sources contributing to uncertainty of results to determine reliability of measurement process in quantitative terms. Develops metrology methods and techniques based on principles of measurement science, technical analysis of measurement problems and accuracy and precision requirements. Will work alongside the Metrology Manager to tackle initiatives and projects that ultimately shape the future of the department.

This is a highly visible role with opportunities to grow.

Essential Functions :

Maintain metrology recognition / accreditation

Perform technical assessments for personnel performance

Develop and lead technical audits of metrology (including suppliers) to verify traceability of standards and compliance with published standards and guidelines

Develop, document, and maintain procedures and best practices based on principles of measurement science, technical analysis of measurement problems and accuracy and precision requirements

Develop, implement, and maintain everything relating to metrology per published standards and guidelines

Design and document measurement reference material for tool fixture building and manufacturing of products

Provide technical input to quotes and capital spending

Perform Equipment Performance Report evaluations and monthly audits

Perform and train in metrology principles as required

Assist in troubleshooting and root cause analysis of measurement issues or measurement system problems and advise project engineers in measurement techniques & equipment operation

Perform state-of-the-art or special measurement tasks

Evaluate and recommend M&TE for use in measurement applications

Evaluate supplier's products and provide feedback; work with suppliers to resolve product issues and make improvement recommendations

Train technicians and engineers in metrology methodologies and measurement principles as it relates to aircraft manufacturing and tooling jig / fixture building

Perform uncertainty evaluation and analysis for measurement standards and associated measurement

Experience with Laser Tracking Interferometer or non-Interferometer Systems (FARO-LEICA-API)

Must be familiar with computer-aided metrology systems such as Laser trackers, articulated arms, scanners, 6DoF (Six Degree of Freedom) etc. Experience with Hexagon equipment is preferred

Experience with inspection, maintenance / repair, testing and optical and mechanical alignment / adjustment of laser modules and laser tracking systems

Experience with calibration / compensation of instruments to ensure quality measurements

Experience with computer-aided measurement software (CAMS) (Verisurf, SA and Polyworks)

Experience in data collection for the Validation / Verification of Tooling and Production Engineering. Coordination with Manufacturing, Engineering, Quality, and Tool Design to interpret, analyze, and advise on the data results

Experience with assembly tooling and / or composite tooling

The ability to set up reference systems, perform transformations and alignments using the least squares adjustment to give minimal error value(s) for key features as defined by the design requirements

Experience in Microsoft Office suite

Ability to communicate / interface with multiple levels, such as Manufacturing Engineering, Quality Assurance, and Tool Design to interpret, analyze, and advise on the data results

The ability to work on high ladders and portable platforms, ability to lift heavy objects over 35lbs., and the ability to stand for long periods of time is required

Willing to travel 10% of time

This position may be filled as a Level 2 or Level 3 based on the qualifications outlined below.

Basic Qualifications Metrology Engineer 2 :

BS in Science, Technology, Engineering or Mathematics (STEM) discipline plus two (2) years of engineering / calibration experience OR MS in Science, Technology, Engineering or Mathematics (STEM) discipline plus zero (0) years of engineering / calibration experience

Process engineering experience

Familiarity with Design of Experiment (DOE), Statistical Process Control (SPC), 6 sigma concepts for process development and control

Knowledge of Geometric Dimensioning and Tolerancing (GD&T)

Fluency in MS Office software applications

This position requires the ability to travel up to 10% of the time

Current US Secret Security Clearance (US Citizenship is required)

Ability to obtain PAR

Basic Qualifications Metrology Engineer 3 :

BS in Science, Technology, Engineering or Mathematics (STEM) discipline plus five (5) years of engineering / calibration experience OR MS in Science, Technology, Engineering or Mathematics (STEM) discipline plus three (3) years of engineering / calibration experience

Process engineering experience

Familiarity with Design of Experiment (DOE), Statistical Process Control (SPC), 6 sigma concepts for process development and control

Knowledge of Geometric Dimensioning and Tolerancing (GD&T)

Fluency in MS Office software applications

This position requires the ability to travel up to 10% of the time

Current US Secret Security Clearance (US Citizenship is required)

Ability to obtain PAR

Preferred Qualifications Metrology Engineer 2 / 3 :

STEM Degree (Science, Technical, Engineering or Mathematical)

Experience designing in 3D CAD e.g. CATIA, NX, CREO etc. Has a firm understanding of GD&T and tolerance stack-up

Experience managing projects (Cost, schedule and technical performance). Understanding of Coordination of design and fabrication requirements for tools and fixtures with customers, both internal and external

Experience working hands-on in a production assembly line environment

Experience providing innovative techniques focused on improving product designs and tooling assemblies or equipment

Composite experience and process knowledge

Secret or Top Secret clearance preferred

Manufacturing / Assembly Tooling and / or composite Tooling Experience / Knowledge

Measurement Theory application and process in more than one discipline

Experience in reverse engineering and model building from collected data

Knowledge of Theodolite systems, Photogrammetric laser radar systems, laser scanning systems and articulating arms

Experience with one or more of the following disciplines : torque, torque transducers, temperature, humidity, pressure, vacuum, leak, sound, photonics, wind flow, mass, scales, force, accelerometers; verification and certification of ESD equipment and workstations; Dimensional : length, angles, flatness; Calibration principles and practice

Procedure writing, Data template creation, Researching project and technologies

Familiarity with CAD software (NX, AutoCAD, CATIA or similar)

Salary Range : $70,200 - $105,400

Salary Range 2 : $86,600 - $130,000

The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.

Employees may be eligible for a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and / or personal business.

The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.

Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity / Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO / AA and Pay Transparency statement, please visit. U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

J-18808-Ljbffr