CBA AIRCRAFT PAINTER - T-45 PROGRAM, NAS MERIDIAN, MS- CC

CBA Aircraft Painter - T-45 Program, NAS Meridian, MS- CC

Job Category : Installation And Maintenance Requisition Number : CBAAI005214 Showing 1 location Job Details

Description

Principal Accountabilities

Coats surfaces of aircraft and support equipment components, accessories, and related equipment, with paint, lacquer, epoxy, resin, or other materials, using brushes, rollers, spray guns, and other devices.

May be required to perform Lead duties when designated and authorized. May be required to perform Collateral Duty Quality Control Inspector (CDQCI) duties when designated and authorized.

Required to handle hazardous materials in the performance of assigned duties. Must be customer-oriented.

Inspect aircraft / support equipment, components, engines, and accessories for surface integrity or corrosion products in accordance with Maintenance Instruction Manuals (MIMs), Illustrated Parts Breakdowns (IPBs), Technical Directives (TDs), Maintenance Check Lists (MCLs), and company work and maintenance instructions.

Remove paint or other protective materials using approved tools, agents, and techniques.

Remove corrosion products using approved tools, equipment, and techniques.

Prepare the surface for painting.

Protect other surfaces or component parts not being painted by using masks, covers, or other approved techniques.

Coat surfaces or aircraft components, engines, or aeronautical support and appropriate materials, using approved equipment.

Paint insignia, letters, or numerals as required.

Coordinate with supervision and Quality Control to resolve questions concerning serviceability and / or on repair procedures.

Maintain cleanliness of the work center and around your assigned work area.

Assist with ordering parts, tools, materials, and equipment as required.

Document work accomplished or Maintenance Action Forms (VIDS / MAFs) or WECMS / GOLD System.

Responsible for adhering to all applicable Foreign Object Damage (FOD) prevention rules and regulations including participation in FOD walk down when directed.

Responsible for adhering to the company tool control program.

Comply with established general and industrial safety rules and regulations as applicable to the contract, facilities, and job assignment.

May be required to perform simple computer input and extraction functions.

Perform preventative maintenance on assigned shop and support equipment.

Comply with established hazardous waste program and Local, State, and Federal Environmental Protection Agency regulations.

May be required to perform off-site services on assigned detachments.

Familiarization with OPNAVINST 4790.2 Series and other applicable Navy Instructions, Maintenance Instruction (MIMs), Illustrated Parts Breakdowns (IPBs), Technical Directives (TDs), manufacturers manuals, and company instructions.

Maintain knowledge of material safety data sheets and applicable safety precautions.

May be required to become Aircraft and Support Equipment Wheel and Tire qualified and certified.

Must be knowledgeable in handling and disposing of hazardous waste.

Must have a valid state operator's license and be able to pass the Government licensing requirements.

Must be able to read, speak, write legibly, and understand the English language.

Assist when directed to ensure safety, security, and preservation of Government-owned and company-owned equipment.

May be required to perform duties of Hazardous Waste Coordinator, Chemical Waste Custodian, or Accumulation Point Coordinator when authorized and designated.

May be required to perform duties of Wheel and Tire Technicians and assist other technicians, specialists, workers, and mechanics during periods of personal or sick leave, vacation, breaks, reserve duty, or during increased workload periods.

Must be able to wear a respirator when performing assigned duties.

Perform other reasonable related incidental duties when directed.

Qualifications

In the past six (6) years, must have three (3) years experience in corrosion identification, removal, treatment, and preservation on aircraft and aircraft components.

Must be able to obtain the following within 6 months of hire : satisfactorily complete a resident 40-hour course of instruction for removal, prevention and treatment;

and successfully complete or possess a resident 80-hour course of instruction on naval aircraft painting and touch-up equivalent to the Naval Aviation Depot (NADEP) paint course.

NOTE : Painters of Support Equipment do not require the 80-hour paint course of instruction). Must be able to read, write, speak and understand English.

Must successfully pass a company physical prior to employment / promotion and annually thereafter.

As a government contractor, Vertex Aerospace requires all employees to be fully vaccinated as a condition of employment in accordance with Executive Order 14042.

Exceptions to this policy are granted on a case-by-case basis for those that request a religious or medical accommodation.

A vaccination status form and proof of vaccination, if applicable, is required.

Physical Demands

This classification activity is usually accomplished in a paint shop environment and as such requires the scope of physical movements and postures normally associated with this activity.

May be required to lift objects whose weight normally will not exceed 50 pounds. Special vision abilities required to perform this job are close vision, peripheral vision, depth perception, and the ability to adjust and focus.

Must be able to have a safe fit around the face for a full respirator.

Work Environment :

The diversity of work conditions may range from an environment where there is little or no physical discomfort, to an environment where inclement weather may subject individual to severe changes of temperature, wind, rain, etc.

May be required to work in areas where high noise hazards prevail. May be exposed to fumes or airborne particles. May be exposed to electrical shock hazards.

Licensing / Certification Requirements :

• Formal / Specialized Training or Equivalent : *must be obtained within 6 months of hire*
• 40-hour course of instruction for removal, preservation, and treatment
• 80- hour course of instruction on naval aircraft painting and touch-up (equivalent to Naval Aviation Depot (NADEP) paint course
• Hazardous Waste Communications Trained
• FOD and TCP Awareness Trained
• Security Clearance Awareness Training
• OPNAV INST 4790.2 Program Awareness
• ISO 9001-2000 Program Awareness
• Government On Line Data (GOLD) System Trained
• Valid State Drivers License
• Support Equipment Operators Certification
• Collateral Duty Inspector (may be required)#
• Respirator Trained and Fitted / with Paint Physical
• Egress System Checkout
• Aircraft Brake Rider Certified
• Operational Risk Management (ORM) Training
• Aircraft Towing Certified

Vertex is committed to building a diverse and inclusive environment in which we recognize and value each others differences as well as fostering a culture that promotes its core values : Professionalism, Integrity, and Respect.

As an equal opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, or status as a protected veteran.

As a government contractor, Vertex Aerospace requires all employees to be fully vaccinated as a condition of employment in accordance with Executive Order 14042.

Exceptions to this policy are granted on a case-by-case basis for those that request a religious or medical accommodation.

A vaccination status form and proof of vaccination, if applicable, is required.

MAINT

VETS

Qualifications

Skills

Behaviors

Motivations

Education

Required

High School or better.

Experience

Licenses & Certifications

Equal Opportunity Employer / P