Electrical and Instrumentation Technician

Job Title : Electrical & Instrumentation Technician

Location

Millbury, MA

POSITION SUMMARY

Currently looking for an Electrical and Instrumentation Technician who is skilled, detail oriented, and self-motivated individual.

The basic function of the E&I Technician is to install, troubleshoot, clean, inspect, calibrate, and maintain electrical, instrumentation, and distributive control equipment throughout the facility in a safe and professional manner.

JOB RESPONSIBILITIES

• Assists with monitoring and maintaining facility equipment (with supervision) to ensure safe and efficient equipment and facility operation.
• Performs electrical preventive and repair maintenance procedures safely and professionally with adequate supervision in accordance with Federal and State Regulations, and Company Work Rules, Policies and Procedures.
• Initiates and completes work-orders and requisitions and documents all critical and or pertinent information on a routine basis by direction and with supervision / training.
• Responds and reports to work during off hours when emergency repairs are required with direct / remote assistance and / or supervision.
• Travels to other facilities within the Company when technical support is required.
• Takes proactive measures to address improvement opportunities.
• Performs less skilled duties when required or requested.
• Completes the Corporate and Plant Training Programs within the time frame prescribed.
• Identifies and effectively uses basic and precision measuring tools to calculate and determine lengths, surface areas, and volumes as necessary while performing maintenance tasks on a routine basis.
• Follow standard safety procedures, correct safety and environmental hazards, and report them to the Shift Supervisor immediately.

Reads, understands, and applies information such as lockout / tagout procedures, safety rules, job hazard analyses, operating and maintenance instructions, and procedure manuals.

• Works overtime.
• Works rotating shifts during outages or if requested.
• Communicates clearly and concisely both verbally and in writing; as well as communicate clearly whether using in-situ intercom system, two-way radio, or face to face.
• Anticipates typical problems, identify potential or recurring problems, and take appropriate action with supervision / training.

Troubleshoots equipment, diagnose problems and repairs with supervision / training.

Operates other equipment including, but not limited to, industrial forklifts, manlifts, skid steer type loaders, and other mobile equipment.

REQUIREMENTS

• High school diploma or general education degree (GED) or equivalent.
• Licensed Journeyman Electrician or minimum of 2 years’ experience in the Electrical Field. Instrumentation experience not required.
• Licenses required as necessary to comply with State, Environmental, and / or Federal regulatory agencies or if Electrician, licensed as necessary by State, Environmental, and / or Federal regulatory agencies.

Work Environment :

• Listed below are key points regarding environmental demands and the work environment of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job.
• Noise in work environment
Physical Demand :
• Stand
• Stand
• Sit for prolonged periods of time
• Walk
• Handle tools, equipment, fine motor skills
• Reach with hands and arms
• Climb and walk on heights often greater than 4 feet
• Stoop, kneel, bend, push, pull, crawl
• Ascend and descend stairs and stationary vertical ladders as part of normal work activity and emergency egress situations
• Lift 50 lbs.
• Move about all areas of the plant, including catwalks, deck grating, and uneven surfaces
• Close vision, distance vision, peripheral vision, depth perception, corrected or otherwise
• Operate a 1.5-inch fire hose operating at 125 psi line pressure to the extent required to extinguish fire
• Operate fire extinguishing equipment ranging from handheld extinguishers to 200 lb portable units
• Access confined spaces and pressure vessels through standard 12" by 16" manways

PPE Required :

• Work in areas under adverse conditions that may require the donning and use of personal protective equipment including, but not limited to, the following with average fatigue :
• Negative pressure respirator
• Positive pressure respirator
• Self-contained breathing apparatus (steel or composite bottle)
• Hardhat
• Approved safety shoes
• Eye protection
• Rubber suit and gloves
• Chemical resistant suit
• Heat resistant outerwear
• Flame resistant outerwear
• Approved hearing protection
• Gloves
• Safety harness
4 days ago