Diesel Fleet Technician II 2nd shift

Sysco
Warminster, PA, United States
Full-time
We are sorry. The job offer you are looking for is no longer available.

Company :

US0629 Sysco Allentown (Division of USA III)

Zip Code : 18067

18067

Minimum Level of Education :

High School or Equivalent

Minimum Years of Experience :

3 Years

Employment Type : Full Time

Full Time

Travel Percentage :

COMPENSATION INFORMATION :

The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison.

Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factors

JOB SUMMARY

To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability.

RESPONSIBILITIES

Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet.

Perform FAI / CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies.

Includes all state-required inspections and frequencies).

Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment.

Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment.

Address all Driver Vehicle Inspection Report write ups timely, and efficiently.

Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems.

Follow procedures including documenting all work performed on work orders.

Learn and develop efficiency in Sysco computer programs

Proficient in electrical meter testing

Knowledge of controls and electric (DC (distribution center) low voltage

Electric motor knowledge (DC)

Complete electrical repairs and welding projects as needed.

QUALIFICATIONS

Education

Medium / Heavy Duty truck technical training

High school diploma or GED required

Experience

2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair

Current and valid driver's license.

Certifications, Licenses, and Registrations

Annual Inspector Certification, Knowledge, Skills, and Abilities

Brake Inspector Certification, Knowledge, Skills and Abilities

ASE certifications; Automotive or Medium / Heavy Duty Trucks (Preferred, Not Required)

609 HVAC Certification

Professional Skills

Working knowledge of computer-based diagnostic software for OEM's and component manufacturers

Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics

Expert knowledge and skill of all vehicle systems and components

Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment

Moderate knowledge and skill in Preventive Maintenance Inspections and repair

Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG)

Basic computer skills and knowledge

Moderate knowledge of all DOT (FMCSA) regulations

Basic knowledge of OSHA safety regulations

Basic knowledge of environmental regulations

The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment.

Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.

Ability to operate various pieces of equipment

Ability to stand, sit, walk, bend, reach

Ability to push / pull

Ability to lift / carry

Ability to grasp tools

Ability to perform Repetitive motion : wrenches and hand tools

Physical Demands

While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear.

The employee is frequently required to sit and reach with hands and arms.

The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl.

The employee is occasionally required to sit and must frequently lift and / or move up to 100 lbs.

Work Environment

While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and / or humid conditions;

and moving mechanical parts and may be required to work in confined spaces.

The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call.

The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.

e. training, business continuation, etc.).

The associate is occasionally exposed to high, precarious places and confined spaces.

The associate is occasionally exposed to fumes or airborne particles.

The noise level in the work environment is usually moderate.

Frequently works outdoors.

BENEFITS INFORMATION :

For information on Sysco’s Benefits, please visit (url removed)

OVERVIEW :

Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations.

We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations.

We’re looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service.

AFFIRMATIVE ACTION STATEMENT :

Applicants must be currently authorized to work in the United States.

We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law.

This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.

12 days ago
Related jobs
Promoted
Laboratory Testing Inc
Lafayette Hill, Pennsylvania

This is a 2nd shift role and the hours are 2:30pm to 11pm Monday through Friday. Mechanical Testing Technician, 2. And now, we're looking for a Mechanical Testing Technician to join our team at our Hatfield, PA location. As a technician at LTI, you'll be the backbone of our mechanical testing operat...

Promoted
Pitney Bowes
Levittown, Pennsylvania

Job Description:Pitney Bowes is hiring a D irect Hire Full Time Onsite Industrial Maintenance Technician II, 3rd shift in our Levittown, Pennsylvania facility. ...

PRA Health Sciences
PA, US

As a Packaging Label Print Technician you will be joining the world’s largest & most comprehensive clinical research organisation, powered by healthcare intelligence. This is a second shift position. ...

Penske Truck Leasing
Bensalem, Pennsylvania

As a Technician II at Penske, you are a respected technician. Shift: 3rd shift: 10pm to 6:30am - Sunday through Thursday. Ready to move your career forward? As a Technician at Penske, you’ll do exactly that. Here, you’ll perform preventative maintenance and repairs of all levels on the newest and ...

Havis Inc
Warminster Township, Pennsylvania

Shift (2:45pm-12:45am Mon-Thurs). ...

Kelly Services, Inc.
West Point, Pennsylvania

Track team metrics • Assigns shift processing schedule . Train Print Technician Level I team members and remain proficient in appropriate systems and software. ...

Pitney Bowes
Levittown, Pennsylvania

Pitney Bowes is hiring a direct hire fulltime Onsite Industrial Maintenance Technician II, 3rd shift in Levittown, Pennsylvania near the Greater Philadelphia Area. Onsite Industrial Maintenance Technician II. The base hourly pay is $27 with a $2 shift differential along with possible overtime. ...

Clemens Food Group
Hatfield, Pennsylvania

Join our team at the Hatfield Plant and play a pivotal role in our operations as an Electro Mechanical Technician. ...

Mauser Packaging Solutions
North Wales, Pennsylvania

Must be willing to work overtime, including weekends and off-shifts as required. Must participate in on-call program and may be required to work additional hours on off shift due to on-call program. ...

Laboratory Testing Inc
Hatfield, Pennsylvania

Mechanical Testing Technician, 2nd shift. This is a 2nd shift role and the hours are 2:30pm to 11pm Monday through Friday. And now, we're looking for a Mechanical Testing Technician to join our team at our Hatfield, PA location. As a technician at LTI, you'll be the backbone of our mechanical testin...