Flight Dynamics Engineer - TS I in GAC Savannah
Unique Skills :
A Flight Dynamics Engineer will :
- Develop requirements to ensure that the airplane is maneuverable, has good handling qualities, and is controllable both for normal operations and in the presence of failures.
- Plan for, participate in, and reduce data from wind tunnel test campaigns
- Create and document high fidelity aerodynamic simulation models
- Conduct a wide variety of static and time history based analyses to ensure that design requirements are being met.
- Conduct, analyze, and document the results of laboratory simulation evaluations
- Plan, support, and reduce data from aircraft flight testing
- Update and validate simulation models based on flight data
- Conduct Functional Hazard Assessment certification testing
The Preferred candidate will have :
- An understanding of aircraft stability and control derivatives
- Experience with 14 CFR Part 23 or Part 25 certification
- Flight test experience
- Experience with one or more of the following skills : Time based simulation, curve fitting, numerical methods, frequency domain analysis, signal filtering, system identification, control system analysis, HQ analysis, PIO analysis.
Education and Experience Requirements
Bachelor's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
Position Purpose : Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services
Job Description
Principle Duties and Responsibilities : Essential Functions :
- Contributes to planning, developing and coordinating of important engineering projects .
- Provides specialized technical assistance to team members .
- Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems .
- Determines and develops own approach to solutions within schedule and cost objectives .
- Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives .
- Acts as liaison with representatives outside of the assigned group / area .
Additional Functions :
- Actively works to improve daily processes and ensures all work meets customer requirements .
- Maintains a current knowledge of developments in the field of specialty and / or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product .
Perform other duties as assigned.Other Requirements :
- Advanced degree in engineering related field preferred.
- The level of technical skill and abilities appropriate for this grade will be established by each discipline.
Additional Information
Requisition Number : 216951
Category : Engineering
Percentage of Travel : Up to 25%
Shift : First
Employment Type : Full-time
Posting End Date : 07 / 31 / 2024
Flight Dynamics Engineer - TS III
Flight Dynamics Engineer - TS III in GAC Savannah. A Flight Dynamics Engineer will:. Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development. Acts independently to determine improved methods and/or proc...
Flight Dynamics Engineer - TS I
Flight Dynamics Engineer - TS I in GAC Savannah. A Flight Dynamics Engineer will:. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services. Gulfstream Aerospace Corporation, a whol...
Avionics / Electronic Systems Engineer - Federated Avionics Systems - TS II
Electronics Engineer, Systems Engineer, Aerospace Engineering, Engineer, Engineering, Aviation. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced busine...
Flight Controls Engineer - TS I
Flight Controls Engineer - TS I in GAC Savannah. Develop, Design, and Certify hardware and software aspects of the Flight Control System equipment as a Cognizant Engineer . Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and...
Fly by Wire Flight Controls Engineer - TS II
Fly by Wire Flight Controls Engineer - TS II in GAC Savannah. Develop, Design, and Certify hardware and software aspects of the Flight Control Computer as a Cognizant Engineer . Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactur...
Fly by Wire Flight Controls Engineer - TS II
Fly by Wire Flight Controls Engineer - TS II in GAC Savannah. Develop, Design, and Certify hardware and software aspects of the Flight Control Computer as a Cognizant Engineer . The Flight Controls team is responsible for the design, development, integration, and certification of the Gulfstream Flig...
Acoustics & Vibration Engineer - TS I
This includes review of engineering designs, conducting acoustic data acquisition and analysis, and report generation in collaboration with other engineering organizations both inside and outside of Gulfstream. Assists with the planning, coordination, performance of design, analysis and liaison engi...
Flight Controls V&V Engineer - TS I
Flight Controls V&V Engineer - TS I in GAC Savannah. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of Gen...
Control Law Design Engineer - TS I
Interface with Systems Engineering, Flight Controls, Flight Operations, Mechanical Systems, Propulsion, and Test and Development teams. Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products an...
Mechanical Engineer
To be successful in this role as a manufacturing engineer with C&H, the candidate should have strong problem-solving skills, positive attitude, excellent communication and technical writing skills, as well as a solid understanding of mechanical engineering principles. Education: Bachelor’s...