Senior Electrical Engineer - Motion Control

Date Posted : *2024-05-17*Country : *United States of America*Location : *MA133 : Tewksbury, Ma Bldg 3 Concord 50 Apple Hill Drive Concord - Building 3, Tewksbury, MA, 01876 USA*Position Role Type : *OnsiteAt Raytheon, the foundation of everything we do is rooted in our values and a higher calling to help our nation and allies defend freedoms and deter aggression.

We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat.

Our team solves tough, meaningful problems that create a safer, more secure world. The Control Systems section within the Sensor Power and Analog Design Department (SPAD) has an exciting employment opportunity for a Senior Engineer with motion control experience.

• This role requires an understanding and working knowledge of classic control theory and vector control of electric motors;
• familiarity with IGBT- or MOSFET-based power electronics inverters used as motor drives (including rectifier front end);

and familiarity with induction and / or permanent magnet electric machines.The Control Systems section is a team of engineers responsible for supporting the design, development and validation of power and actuation (servo) subsystems for various radar systems and other defense applications.

As a Senior Engineer Motion Control you will be responsible for supporting and driving the execution of product development projects.

You will be working as or with a Team / Technical Lead and under the guidance of an Integrated Product Team (IPT) Lead.SPAD is responsible for design engineering including the following areas : * Power System Design - Power System Noise, System Simulation and Modeling, Solid State Transmitters, Tube Transmitters, High Voltage Design, Power Sources, Generators* Power Conversion - AC / DC, DC / DC and DC / AC, Linear and Switching Supplies, Power Factor Correction (PFC), Zero Voltage Switching (ZVS), Resonant Circuits, Synchronization, Noise Controls* Power Distribution - Ground, Air, Shipboard, and Space, Power Generation, Line Voltage, High Current, Low Voltage, Micro-Power, DC, AC, Multi-Phase Power Control, Fault Reporting, Isolation, Protection Circuits, Redundant Systems* Power Sub-System Design - Filters, Harmonic Control, EMI, Circuit Simulation, Magnetics, Protective Relay Systems, Short Circuit and Stress Analyses* Control Systems Servo Control Systems, Motor / Power / Process Control, Digital Feedback Systems, Command Generation, Inertial Stabilization, Navigation AlgorithmsThis position is an onsite role.

• What you will do : Designing and evaluating servo control hardware and / or software solutions to meet system operational and performance requirements* Developing models and controllers for actuation systems (including mechanical subsystems)* Establishing performance, stability and control metrics along with the algorithms necessary to achieve them* Supporting system integration efforts* Defining tasks and providing direction to junior-level engineering and support staff* Other tasks as required by the Section Lead and / or Department Lead.
• Up to 10% travel may be required.* Work in a multidisciplinary team environment focused on execution and engineering excellence, using established business, and engineering tools and processes* Interact with internal and external customers and leadership team members.
• Commute to Andover, Woburn and / or Marlborough sites as needed.*Qualifications you must have : Bachelor’s degree in Electrical Engineering or related Science, Technology, Engineering, or Mathematics (STEM) major.
• 5+ years of experience in power system design, power conversion, power distribution, power sub-system design and / or control systems* Experience in modeling and simulation using PSPICE, MATLAB / Simulink, or similar computer-based tools.
• Experience with actuation systems, fan / pump motor applications, or grid-tied bidirectional converters (including feedback sensing and protections)* Experience with 1-100 kW systems (bus voltages in the range of 100-1000 VDC)* The ability to obtain and maintain a US security clearance.

U.S. citizenship is required as only U.S. citizens are eligible for a security clearance*Qualifications we prefer : Master’s degree in Electrical Engineering or related Science, Technology, Engineering, or Mathematics (STEM) major.

• Understanding and working knowledge of classic control theory and vector control of electric motors* Familiarity with IGBT- or MOSFET-based power electronics inverters used as motor drives (including rectifier front end* Familiarity with induction and permanent magnet electric machines.
• Prior experience as engineering Team Lead (hardware, electrical or integration)* Understanding and working knowledge of non-linear systems and control theory* Hands-on experience with PWM or SVM for voltage modulation in power electronics inverters* Hands-on experience with software (i.

e. DSP) or firmware (i.e. FPGA) implementation of vector controllers for electric machines* Hands-on experience designing power electronics inverters or controlled rectifiers* Ability to create system models capturing implementation-specific characteristics such as propagation delays, quantization, discrete time, sensor non-linearities, etc.

Familiarity with Hardware-in-Loop (HIL) systems and their use for motion control applications* Understanding and working knowledge of project management (including EVMS)* Understanding and working knowledge of requirements management (including DOORS)* Familiarity with commercial or military power input / quality requirements and specifications (DO-160, MIL-STD-704, MIL-STD-1399 or MIL-STD-1275)* Existing US DoD security clearance*What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world.

At RTX we value : Trust, Respect, Accountability, Collaboration, and Innovation* Relocation Eligibility*Learn More & Apply Now! RTX solves some of the toughest challenges in aerospace and defense.

That requires expansive thinking and bold innovation and that, in turn, requires a culture that is diverse, equitable and inclusive.

We embrace individuality and diversity of thought to fuel opportunity for our employees, our customers, and our communities.

We work toward progress, knowing that a more inclusive world is critical to our mission. Not just in this moment, but always.

Please consider the following role type definition as you apply for this role. Onsite : Employees who are working in Onsite roles will work primarily onsite.

This includes all production and maintenance employees, as they are essential to the development of our products.* Clearance Information : This position requires a security clearance.

DCSA Consolidated Adjudication Services (DCSA CAS)*, an agency of the Department of Defense, handles and adjudicates the security clearance process.

More information about Security Clearances can be found on the US Department of State government website here : https : / / www.

state.gov / m / ds / clearances / c10978.htm (https : / / www.state.gov / m / ds / clearances / c10978.htm)The salary range for this role is 77,000 USD - 163,000 USD.

The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education / training, and key skills.

Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays.

Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.

Hired applicants may be eligible for annual short-term and / or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement.

Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and / or the company’s performance.

This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.

RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is An Equal Opportunity / Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Privacy Policy and Terms : *Click on this link (http : / / www.rtx.com / privacy / Job-Applicant-Privacy-Notice) to read the Policy and Terms