Chemical Mixer

Job Description

Job Description

Molding Products is looking for a Chemical Mixer to add to 3rd shift.

10 : 00pm - 6 : 30am

$20.00 / hr + $1.50 shift premium.

• Wearing a respirator to perform certain tasks is a requirement for safety. You must keep face shaved to wear the respirator correctly.

JOB OVERVIEW :

Reporting to the Shift or Mix Lead or directly to the Production Supervisor, the Mixer Operator engages in the mixing activities and duties of the Mixing Department contributing to a safe, world-class quality, efficient operation.

ESSENTIAL FUNCTIONS ( MINIMUM REQUIREMENTS) :

1. Interact with the Shift or Group Leader or directly to the Production Supervisor regarding the mixing needs of the production schedule.

2. Proactively communicate availability and / or issues of raw materials, syrups, A and C sides along with equipment.

3. Verify the raw materials to the Weigh sheet and stage materials accordingly recording their lot numbers and quantities that are added to the mixing tank or vat.

4. Check tank farm to confirm resin availability and on-hand syrups. Communicate any shortages or issues to the Lead or Supervisor.

5. Add and mix raw materials according to defined procedures and record lot numbers accurately.

6. Return the “Used” Raw material skids to the staging area or warehouse.

7. Test pastes for temperature, Viscosity, and any other attributes per established procedures and / or practices.

8. Notify Lead and / or supervisor of any out-of-specification test results.

9. Clean and 5S area and equipment to maintain a safe and spill-free environment.

10. Clean up spills, report any over 1 lb. or more immediately to Lead, Supervisor, Production or HSE Manager.

11. Label and move scrap paste, acetone, and styrene drums to proper storage location.

12. Accurately and proactively warm up A and C-sides as required by the SMC lines.

13. Notify supervisor of any mechanical problems with mix, equipment, errors, or hazards, etc.

14. Provide records and reports as required by the Quality Management System.

15. Performs miscellaneous tasks in production area as directed by the Group Leader or Production

Supervisor.

16. Responsible for handling, labeling, and record keeping of Hazardous Waste.

17. Assure vats, valves, and lids are clean and free of contamination before mixing in the vessel or placing a lid over it. Have a Lead, Supervisor, or QC Technician verify the cleanliness of the vessel before proceeding with mixing in the vessel.

18. Be sure to mix ingredients in the order of addition and in the quantities requested.

19. Be 100% trained and competent in ‘breaking down’ mixing equipment blades, LOTO out the Mixers, Hockmeyer and Cowles, before performing. Execute accordingly each time required. If any questions or concerns, contact a Lead, Supervisor, or Production Manager before proceeding.

Other Duties : Please note this job description is not a comprehensive listing of all duties, activities, or responsibilities that are required of the employee for this job. Duties, activities, or responsibilities may change at any time with or without notice. Employees shall perform all tasks assigned by their manager.

Required Job Qualifications