2nd Shift Metal Finisher

Job Description

Job Description

Description :

SUMMARY OF POSITION :

Responsible for setting up and operating a variety of hand power tools used to remove excess materials or burrs from metal surfaces; sharpen edges or corners; sands surfaces of metals.

ESSENTIAL DUTIES AND RESPONSIBILITIES :

This list of duties and responsibilities is not all-inclusive and may be expanded to include other duties and responsibilities, as management may deem necessary from time to time.

• Grinds, files, or sands metal surfaces to remove burrs and sharp edges using hand tools and grinders.
• Visually and physically inspect parts for any dents or scratches that need to be removed.
• Strong understanding in blueprint reading.
• Interprets drawings, manuals, specifications, or sample parts to determine finish condition of work pieces, sequences of metal finishing operations, and set up requirements.
• Smooth surface to specified finish with hammer, dolly blocks, and hand and power tools.
• Perform general clean-up duties of the equipment and surrounding areas.
• May perform basic material handling duties with the use of manual pallet jack and / or forklift to move material and stage materials.
• Adhere to all Jor-Mac and OSHA safety related work rules and procedures.
• Other duties as assigned or required.

Requirements :

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and / or abilities required.

PHYSICAL REQUIREMENTS :

While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel; occasionally required to sit and talk; frequently required to hear, walk and continuously stand and reach with hands and arms. The employee will frequently lift and / or move up to 50 pounds and occasionally lift and / or move up to 75 pounds. Specific vision abilities required by this position include close vision and the ability to adjust focus. Continuously exposed to manufacturing noise.