Aircraft Interior Crew

JOB TITLE : Aircraft Interior Technician

REPORTS TO : Production Supervisor

FLSA STATUS : Non-Exempt

The following description is not intended as an exhaustive list of all responsibilities,

Duties and skills required of personnel so classified. Management retains the discretion to add to or change the duties of the position at any time.

SUMMARY :

Under close supervision, make repairs to airline seats and subassemblies and / or to Monuments : Lavatories, Galleys and other interior components according to specifications and blueprints.

JOB FUNCTIONS :

• Repair aircraft seating, including passenger and crew seats.
• Repair interior monuments (galleys, lavatories, and class dividers), overhead bins, and side walls.
• Disassemble components, determine malfunctions & make repairs
• Read inspection reports & rework instructions
• Read blueprints to determine the type of repair, tools required, and to plan the sequence of operations.
• Read Schematics
• Sheet metal fabrication to drawings
• Composite and laminate repairs.
• Reassemble components to meet company, customer,r and FAA standards.
• Accurately read and follow schematics / blueprints and work orders.
• Use bonding materials, fillers, and compounds to make repairs
• Plumbing repair
• Read and understand blueprints, CMM & IPCs
• Painting
• Surface preparation
• As Necessary, performs other related duties of which the above are representative.

Management must contact the Human Resource department to add to or change a significant number of duties considered essential to the satisfactory performance of this job by the average incumbent.  Individual abilities may result in some deviation from these guidelines

JOB REQUIREMENTS :

Justifications for Education and Training, Job-Related Experience, and Knowledge / Abilities are general guidelines based on the minimum experience normally required

JOB TITLE : Aircraft Interior Technician

MINIMUM EDUCATION AND TRAINING

None required

A&P License a plus

MINIMUM DIRECTLY RELATED JOB EXPERIENCE :

Experience using hand tools

Experience using power tools

Experience using finishing tools

KNOWLEDGE, ABILITIES, AND SKILLS DESIRED :

Prior Aerospace / FAA experience is a plus

Prior Aircraft Interior experience is a plus

Ability to disassemble components and make repairs

Knowledge of theoretical and practical hand and air tool usage

Read and process inspection reports, rework instructions, and shop travelers

Read mechanical blueprints or job orders to determine the type of repair, tools required, and plan the sequence of operations.

Ability to follow strict instructions, CMMs, and work in a time-sensitive environment to meet deadlines.

Read Schematics

Ability to inspect components for defects or damage

Metal fabrication & repair

Knowledge of plastic trim and vacuum-formed plastic assembly

Experience with bonding materials

Experience with spray adhesives

Sheet metal fabrication to drawings

Metal fabrication & repair

Lubricates moving parts to verify conformance to specifications.

Detect defects or damage

Repair electrical wiring / components

PHYSICAL MOTION :

Walks / Stands at least 80% of each workday.

Other motions : stooping, reaching, bending, pushing, pulling,  repetitive motion hand –wrist; sitting; fingering; grasping; feeling; hearing; talking; handling; seeing.

DEGREE OF PHYSICAL ACTIVITY :

Light work :   Exerting up to 20 pounds of force occasionally.

VISUAL DEMANDS :

Color perception

Depth perception

MENTAL PROCESSES :

Reason

Following simple directions

Planning

Combining information

Remembering

WORK ENVIRONMENT

Noise

Inside work (Shop environment)