Sets-up and operates CNC Turning, Multi-Axis lathes, and other Turning equipment to produce highly precision component parts that meet all quality standards.
Major Areas of Responsibility :
- Set-up and operate CNC Lathes (2-axis and multi-axis) (e.g. Eurotech, Hardinge, etc.)
- Will work with blueprints, operation sheets, and other work instructions.
- Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part.
- Checks to make sure that the material to be used meets all specifications. Obtains bar stock or material from staging area.
- Performs complex set-ups of own work or for others.
- Makes all required adjustments to the machinery. Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program.
Edits the program as necessary.
- Assists other Operators or Set-up / Operators with set-up or production problems and helps to train other set-up / operators.
- Ensures that all manufactured parts are in full compliance to quality standards.
- Performs visual inspections (part relationship to operation sheet / blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department.
- Replaces all worn or damaged tooling as necessary.
- Verifies and records actual part count, both prior to and upon completion of all work
- Performs all routine maintenance on the equipment and maintains all fluid levels.
- Keeps the equipment and work area clean and organized.
- Returns excess bar stock or material to the staging area.
- Moves the finished work to an assigned area. Enters all work performed into the database and documents all scrap.
- Notifies lead person or supervisor of any parts shortages or machining problems / difficulties.
- Packs and washes / preserves parts as needed.
- Performs other machining and assembly operations as needed.
- Performs other related duties as required.
- Interacts with associates from all departments.
Requirements :
- High School diploma or equivalent. Technical school training a plus.
- 3 years of set-up experience minimum required
- Experience with aerospace products and / or other close tolerance parts is a plus.
- Must be familiar with Fanuc and / or Okuma Controls
- Must be able to set and change tools.
- Must be able to use standard gauges and inspection techniques.
- Experience with SPC, inspection documentation, and problem solving is a plus.
- Strong interpersonal and analytical skills.
- Must be able to read and write comments, understand operation sheets / blueprints, specifications, and all applicable company / customer paperwork.
- Must be able to read CNC programs.
- Five plus years of increasingly diverse experience in a machine shop or CNC machining environment
Physical Requirements :
- Ability to push / pull / carry up to 50 lbs.
- Able to stand for up to 8+ hours.
PI98f1e3da56cc-26289-35802135
CNC Lathe Set Up Operator - Level II
Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators. Sets-up and operates CNC Turning, Multi-Axis lathes, and other Turning equipment to produce highly precision component parts that meet all quality standards. Set-up and operate C...
Apprentice - Set-up Operator / Wire EDM
Ability to Set-up and operate Wire EDM Machines: Charmille and Mitsubishi. Ability to lift up to 35 lbs unassisted. ...
Swiss Set-Up Operator - Level II
Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators. Sets-up and operates CNC Swiss Machines to produce highly precision component parts that meet all quality standards. Obtains tooling, gages, inserts and all other equipment neede...
Set-up Operator - 1 / Spring
Works with direction setting up, adjusting and operating relatively complex machinery in the manufacture of a wide variety of parts conforming to accurate quality standards. Ability to lift up to 35 lbs unassisted. ...
CNC Milling Set Up Operator - Level II
Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators. Sets-up and operates CNC Milling Machines to produce highly precision component parts that meet all quality standards. Obtains tooling, gages, inserts and all other equipment nee...
MF Set-Up Operator - 3 - APP
Assists in the direction of other Set-Up and Operator staff to achieve department and company goals and the desired quality and quantity of work. Operator and set-up personnel training. Sets up and operates Automatic Power Presses in the APP Department. Monitor Set Up operations (of department staff...
Set-Up Operator (Auto Power Press)
Set-Up Operator (Auto Power Press):Primary Position Objectives:Sets up and operates Automatic Power Presses. Assists in the direction of other Set¬ Up and Operator staff to achieve department and company goals and the desired quality and quantity of work. Operator and set-up personnel training. Moni...
CNC HTC Machine Operator/Horizontal Lathe
Position: CNC HTC Machine Operator / Horizontal Lathe Employee Type: Full-Time (1st Shift) Opening for highly motivated and team-oriented CNC HTC Machine Operator. Reporting needed repairs, review setup sheet and specifications to determine setup procedures. Operating and set up knowledge of s...
Metal Form -Set-Up Operator/ Fourslide – 2nd Shift
Metal Form -Set-Up Operator/ Fourslide - 2nd Shift Primary Position ObjectivesTo effectively develop and implement documentation, procedures, systems, programs and tools for the purpose of making continuous improvements to the quality, cost, and lead-time of goods and services provided to the custom...
CNC Lathe Operator
...