Job Description
Job Description
Header Painter Blaster
Catoosa Location
Pay Rate and Hours :
- Pay : $19.00 / hr+ depending on experience
- Hours : Monday through Friday, 5 : 00 pm to 1 : 30 am with possible overtime
Job Description :
- Read work orders or receive instructions from the supervisor regarding painting.
- Select premixed paints, or mixes required portions of pigment, oil, and thinning and drying substances to prepare paint that matches specified colors.
- Clean grease, rust, and dirt from the product; wash surfaces prior to painting; may be required to blast parts to prepare for painting;
apply masking tape over parts and areas that are not to be coated.
- Spread drop cloths over floors and cover surfaces that do not require paint with masking tape and paper to protect surfaces during painting.
- Pour coating liquid into a spray container and connect the gun to the air hose; turn the sprayer valves and nozzle to regulate the width and pressure of the spray.
- Install specified nozzles in spray guns.
- Replaces screens and filters; pull the trigger and direct spray onto a work surface to apply prime or finish coat using enamel, polyurethane, epoxy, gel-coat, lacquer, and other industrial paints;
clean spraying equipment and brushes with solvent.
- Load and move materials to work and drying areas by industrial forklift, overhead, and jib cranes.
- Maintains production record of parts and jobs fabricated as required by the Department Manager.
- Abrades surfaces of metal or hard composition object to remove adhering scale, sand, paint, grease, tar, rust, and dirt, and to impart specified finish.
Shovel or pour abrasives such as sand, grit, or a shot of a specified grade into a machine hopper.
- Mask specified areas of object to protect from abrading action.
- Load parts on racks or in enclosed rooms manually or using industrial forklift or overhead cranes.
- Turn valves on equipment to regulate the pressure and composition of the abrasive mixture flowing through the nozzle.
- Start equipment that directs blast or flow of abrasive-laden compressed air, or gas over the surface of parts.
- Direct nozzle over the surface of large parts and manipulates parts under nozzle for a specified interval.
- Examine finished parts to ensure conformance to specifications.
- Maintains production record of parts and jobs fabricated as required by the Department Manager.
- Ability to assist painter in simple paint application.
Skills :
- 1 year of related experience is required.
- Ability to use and interpret DFT measuring equipment.
- Must be able to pass a Pulmonary Function Test (PFT).
- Must be able to wear a respirator.
Benefits :
This is a temp-to-hire position. While on Key Personnel’s payroll, you can access Key’s benefits package, including health, dental, vision, term life insurance, short-term disability, PTO, and more!
To make the best use of your time, only qualified applicants will be contacted. Apply online today at www.keyjobs.com.
Our office is at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and 2 forms of government-issued identification that prove identity and eligibility to work in the U.
S. between the hours of 8 am to 3 pm, Monday through Friday.
Safety Sensitive Role
Key Personnel is an Equal Opportunity Employer.