Job Description : Works a 5 am to 3 : 30 pm Shift under the direction of a foreman, measures and cuts pipe to specified length called out on sketch
Functional Requirements : Read and sign off on JSA prior to starting shift, interprets sketches, able to identify all grade of material listed on sketches, transfer heat numbers from pipe to sketch when required, good math skills required, ability to add and subtract dimensions, ability to read a tape measure, perform preventative maintenance such as greasing, performs daily inspection such as making sure safety guards are in place, checking for leaks in hydraulic hoses, air lines and torch cutting equipment , has knowledge and the ability to operate plasma and / or oxyfuel cutting equipment, maintains a clean and safe work environment at all times
Qualification Standards :
Must be able to work a 5 am to 3 : 30 pm shift
Preferably one (1) to two (2) years of experience in specified skill
MUST be able to read a tape measure
Ability to lay out and cut pipe or the ability to learn
Capable of working in a team setting
Post offer drug / alcohol screen and physical evaluation
Job site "Personal Protective Equipment" requirements (hearing protection, safety glasses, long sleeve shirt, gloves, steel toe boots, etc)
Physical Involvement :
- Employee may be required to do the following : climbing ladders, scaffolds, structures, etc. above and below ground level;
- maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions, handling and manipulating objects and materials;
- coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and / or overhead;
- carrying objects, tools equipment, etc.; standing; sitting; walking; pushing; pulling; bending; kneeling; crouching / squatting;
crawling; seeing with or without correction; hearing with or without correction
Mental Involvement :
Employee may be required to do the following : following set procedures and standards; applying basic mathematical skills;
planning work and selecting proper tools; comparing and understanding differences in the size, shape and form of lines, figures and objects, picturing and evaluating solid objects from drawings and or diagrams, using standards that can be measured or checked.
judging distances and slopes accurately; following oral and / or written directions; reading; writing; ability to recognize and report safety hazards
Work Environment Factors :
Location : industrial construction sites and / or fabrication shop
Mobility Barriers to Access Job Site : uneven ground levels; obstructed pathways; work performed at low and / or high elevations;
work performed in confined areas
Climatic / Environmental Conditions at Job Site : Outdoor climate; Exposed to extreme hot or cold weather, excessive humidity, rain, etc.
various noise levels caused by tools, machinery, equipment, etc.; potential exposure to chemical substances
Miscellaneous Requirements :
There will be times that the individual may be required to perform a task other than their normal operation as required by the company or the foreman, owing to the job demand.
Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and / or protected veteran status in accordance with governing law.
Job Posted by ApplicantPro