Talent.com
Insulator

Insulator

Turner IndustriesSaint Paul Park, MN, US
job_description.job_card.30_days_ago
serp_jobs.job_preview.job_type
  • serp_jobs.job_card.full_time
job_description.job_card.job_description

Job Description

Job Description

Turner Industries Group is hiring Industrial Insulators for work in the St. Paul, MN area. Insulators cover boilers, pipes, tanks and refrigeration units with insulating materials, such as fiberglass, cork, plastic and magnesia to reduce loss or absorption of heat, prevent moisture condensation and to deaden sound.

Functional Requirements :

Wires prefabricated fiberglass covering around steam and hot water piping, Trowels mastic or brushes cement on insulation to obtain a smooth finish and covers piping with cloth, Fits thermo-block and magnesia-block insulation around insulating boilers, evaporators, and turbines, Wires insulation on machinery and staples wire netting over insulation, Trowels cement on wire netting to protect insulating material, Wires cork on salt water, refrigeration and air-conditioning piping and cements cloth over insulating material to obtain a smooth finish, Cuts sheets of insulation into sections, Fits and cements sections around fittings, Covers gas piping of refrigeration or air-conditioning systems with molded plastic, Fabricates detachable insulation for valves or similar fittings, Wires detachable covers on valves or fittings, Installs fiber glass or spun glass on ventilation systems to deaden sound and prevent vibration, Perform additional assignments per supervisor's direction.

Qualification Standards :

  • High school or equivalent
  • One (1) to four (4) years of experience in specified skill (depending on mechanic level)
  • Basic knowledge of Insulator hand tools, tape measure, cutting tools, power tools
  • NCCER certification may be required at some jobsites

Physical Involvement :

May be required to do the following : climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions; handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and / or overhead; carrying objects, tools, equipment, etc.; standing / sitting; walking; pushing; pulling; bending; kneeling; crouching / squatting ; seeing with or without correction; hearing with or without correction; wearing respirator and other PPE; stepstool use; work in excessive heat; work in excessive cold; work in loud environment

Mental Involvement :

May be required to do the following : follow set procedures and standards; follow oral / or written directions; knowledge of federal, state and company standards and regulations; ability to read and write; ability to recognize and report safety hazards etc.; interpret written plans and blueprints; applying basic mathematical skills; planning work and selecting proper tools; comparing and understanding differences in the size, shape and form of lines, figures and objects; picturing and evaluating solid objects from drawing or diagrams using standards that can be measured or checked; ability to communicate with others effectively; ability to work in a team and get along with others; ability to learn new tasks; remember processes, maintain focus, and complete tasks; ability to remain calm under pressure; manage time and expectations across multiple projects; ensure that work is done in a consistent manner and in compliance with directions

Work Environment Factors :

  • Location : industrial maintenance and construction sites, pipe fabrication shops
  • Mobility Barriers to Access Job Site : uneven ground level; obstructed pathways; work performed at low and / or high elevations; work performed in confined areas
  • Climatic / Environmental Conditions at Job Site : predominately outdoor climate; may be exposed to extreme hot or cold weather, excessive humidity, rain, etc.; various noise levels caused by tools, machinery, equipment, etc., potential exposure to chemical substances
  • Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and / or protected veteran status in accordance with governing law.

    SPECIAL WARNING : PLEASE BE AWARE THAT YOU WILL NOT HAVE TO PAY FOR THIS DRUG / ALCOHOL TEST. PLEASE DO NOT SEND MONEY OR ANYTHING OF VALUE TO PERSONS WHO STATE THAT YOU HAVE TO PAY ANY AMOUNT OF MONEY OR GET A DEBIT / CASH CARD FOR PURPOSES OF THE DRUG / ALCOHOL TEST. IF YOU HAVE ANY QUESTIONS ABOUT THIS, PLEASE CONTACT OUR HIRING OFFICE AT TURNERCOMMUNICATIONS@TURNER -INDUSTRIES.COM BEFORE AGREEING TO PAY FOR A DRUG / ALCOHOL TEST

    Job Posted by ApplicantPro

    serp_jobs.job_alerts.create_a_job

    Insulator • Saint Paul Park, MN, US

    Job_description.internal_linking.related_jobs
    Fabricator - 2nd Shift

    Fabricator - 2nd Shift

    MIRATECH CorporationPrior Lake, MN, USA
    serp_jobs.job_card.full_time
    serp_jobs.filters_job_card.quick_apply
    Shift Monday - Thursday, 2 : 30pm - 1 : 00am with overtime as necessary; sometimes.Health, Dental & Vision Insurance.Flexible Spending Account (FSA). PTO annually (prorated based on start date).Prod...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Deburring Technician - 2nd Shift

    Deburring Technician - 2nd Shift

    VelosityBrooklyn Park, MN, United States
    serp_jobs.job_card.permanent
    The Swiss Machining Deburring Technician is responsible for set up and operation of deburring equipment to remove excess materials or burrs from surfaces on or in various plastics and metals to mee...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_variable_days
    • serp_jobs.job_card.promoted
    IS Technician

    IS Technician

    CleanHarborsRosemount, MN, US
    serp_jobs.job_card.full_time
    HPC-Industrial, powered by Clean Harbors, in Rosemount MN is looking for a Hydroblaster / Field Technician to work at various customer locations, and to join their safety conscious team! This team me...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Estimator II

    Estimator II

    Anderson DahlenRamsey, Minnesota, United States, 55303
    serp_jobs.job_card.full_time
    serp_jobs.filters_job_card.quick_apply
    Gray’s Specialty Equipment segment offers a comprehensive range of expert services, including design, manufacturing, integration, installation, and maintenance of some of the most advanced systems ...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_variable_days
    • serp_jobs.job_card.promoted
    Brake and Alignment Specialist

    Brake and Alignment Specialist

    SailSaint Paul, MN, United States
    serp_jobs.job_card.full_time
    At SAIL, we don't just manage propertieswe create communities where residents feel at home and owners trust our operational mastery. Our maintenance team is the backbone of that promise.If you're an...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Swiss Machinist II or III - 2nd shift

    Swiss Machinist II or III - 2nd shift

    VelosityForest Lake, MN, United States
    serp_jobs.job_card.permanent
    Swiss Machinist II or III to support production at our manufacturing facility in Forest Lake, MN.A Swiss Machinist II is responsible for set ups and operation of Swiss Machines per work instruction...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    MACHINIST III- NIGHT SHIFT WITH 10% DIFFERENTIAL

    MACHINIST III- NIGHT SHIFT WITH 10% DIFFERENTIAL

    Anderson DahlenRamsey, Minnesota, United States, 55303
    serp_jobs.job_card.full_time
    serp_jobs.filters_job_card.quick_apply
    Gray’s Specialty Equipment segment offers a comprehensive range of expert services, including design, manufacturing, integration, installation, and maintenance of some of the most advanced systems ...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Travel Surgical Tech - $2106 / Week

    Travel Surgical Tech - $2106 / Week

    Cynet HealthSaint Croix Falls, WI, US
    serp_jobs.job_card.full_time
    Cynet Health is seeking an experienced Surgical Tech for an exciting Travel Allied job in Saint Croix Falls, WI.Shift : 5x8 hr days Start Date : ASAP Duration : 13 weeks Pay : $2106 / Week.Ranked #5 Be...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_variable_days
    • serp_jobs.job_card.promoted
    Brake and Alignment Specialist

    Brake and Alignment Specialist

    Heartland Tire IncChamplin, MN, United States
    serp_jobs.job_card.full_time
    The General Service Technician performs basic preventative .Service Manager any needed parts, tires or service that customers may . Provides helpful, friendly and respectful customer service with a ...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Swiss Machinist II or III - 1st shift

    Swiss Machinist II or III - 1st shift

    VelosityForest Lake, MN, United States
    serp_jobs.job_card.permanent
    Swiss Machinist II or III to support production at our manufacturing facility in Forest Lake, MN.A Swiss Machinist II is responsible for set ups and operation of Swiss Machines per work instruction...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Travel Ultrasound Tech in Red Wing, MN

    Travel Ultrasound Tech in Red Wing, MN

    AlliedTravelCareersRed Wing, MN, US
    serp_jobs.job_card.full_time
    AlliedTravelCareers is working with Aequor to find a qualified Ultrasound in Red Wing, Minnesota, 55066!.With Aequor, you can enjoy the freedom to advance your career and travel the country, all wh...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_variable_days
    • serp_jobs.job_card.promoted
    Travel Ultrasound Tech - $2,531 per week in Red Wing, MN

    Travel Ultrasound Tech - $2,531 per week in Red Wing, MN

    AlliedTravelCareersRed Wing, MN, US
    serp_jobs.job_card.full_time
    AlliedTravelCareers is working with Medical Solutions to find a qualified Ultrasound in Red Wing, Minnesota, 55066!.A facility in Red Wing, MN is seeking its next amazing Sonographer.Read on if thi...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_variable_days
    Insulation Installer

    Insulation Installer

    MaxTech, Inc.Stacy, MN, US
    serp_jobs.job_card.full_time
    serp_jobs.filters_job_card.quick_apply
    Insulation Installer Starting Wage $20.Picture your skilled labor experience at work with an industry leader!.Enjoy a team-driven atmosphere with a wide-ranging benefits package, and excellent job ...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Workholding Technical Specialist

    Workholding Technical Specialist

    Mate Precision TechnologiesAnoka, Minnesota, United States, 55303
    serp_jobs.job_card.full_time
    serp_jobs.filters_job_card.quick_apply
    Workholding Technical Specialist.Mate’s workholding solutions to successfully produce their products.This role combines technical expertise, CAD design, customer collaboration, and sales support to...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_variable_days
    • serp_jobs.job_card.promoted
    Brake and Alignment Specialist

    Brake and Alignment Specialist

    NICO PRODUCTS, INC.Minneapolis, MN, United States
    serp_jobs.job_card.full_time
    Employment / staffing agencies - please do not reach out about this ad.Maintenance (Production / Manufacturing) -.Nico Products / Minneapolis MN. Things to consider prior to applying : .The Company follow...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    CNC Mill Specialist - 1st Shift

    CNC Mill Specialist - 1st Shift

    VelosityForest Lake, MN, United States
    serp_jobs.job_card.permanent
    CNC Mill Machinist on 1st shift to support our manufacturing facility in Forest Lake, MN.A CNC Milling Specialist is responsible for the setup, operation, and maintenance of CNC milling machines to...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Insulator - St. Paul, MN

    Insulator - St. Paul, MN

    Turner IndustriesSaint Paul, MN, US
    serp_jobs.job_card.full_time
    Turner Industries Group is hiring Industrial Insulators for work in the St.Insulators cover boilers, pipes, tanks and refrigeration units with insulating materials, such as fiberglass, cork, plasti...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_30
    • serp_jobs.job_card.promoted
    Travel Surgical Tech - $2,106 per week in Saint Croix Falls, WI

    Travel Surgical Tech - $2,106 per week in Saint Croix Falls, WI

    AlliedTravelCareersSaint Croix Falls, WI, US
    serp_jobs.job_card.full_time
    AlliedTravelCareers is working with Cynet Health to find a qualified Surg Tech in Saint Croix Falls, Wisconsin, 54024!.Job Title : Surgical Tech Profession : Surgical Tech Specialty : Operating Ro...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_1_day
    • serp_jobs.job_card.promoted
    Deburring Technician - 1st Shift

    Deburring Technician - 1st Shift

    VelosityBrooklyn Park, MN, United States
    serp_jobs.job_card.permanent
    The Swiss Machining Deburring Technician is responsible for set up and operation of deburring equipment to remove excess materials or burrs from surfaces on or in various plastics and metals to mee...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_variable_days
    • serp_jobs.job_card.promoted
    WELDER I

    WELDER I

    Anderson DahlenRamsey, Minnesota, United States, 55303
    serp_jobs.job_card.full_time
    serp_jobs.filters_job_card.quick_apply
    Gray’s Specialty Equipment segment offers a comprehensive range of expert services, including design, manufacturing, integration, installation, and maintenance of some of the most advanced systems ...serp_jobs.internal_linking.show_moreserp_jobs.last_updated.last_updated_variable_days