Automotice Repait Technician II

Job Description

Job Description

Description :

An auto mechanic's job involves diagnosing, repairing, and maintaining vehicles, including routine maintenance and major repairs like engine overhauls. They also advise customers on necessary repairs, estimate costs, and keep detailed records of work performed.

• Perform maintenance and repair on customer vehicles.
• Identify problems with vehicles using the diagnostic equipment.
• Explain automotive repairs and issues and provide great customer service.
• Plan repair procedures using charts manuals and experience.
• Test the functionality of parts and systems
• Perform basic auto care and maintenance tasks such as oil changes, fluid level checks, and tire rotation.
• Repair and replace brake pads, wheel bearings, sensors and other parts.
• Perform routine maintenance and general mechanic work on vehicles.
• Additional duties as assigned.
• Duties and responsibilities may change, and new ones may be added, at anytime with or without advanced notice.

Requirements :

High School diploma or equivalent

1-5 year automotive and engine repair experience or auto mechanic training

Valid driver’s license

Clean Driving Record

Ability to maintain a professional appearance and provide friendly customer service.

Excellent diagnostic and troubleshooting skills

Ability to follow detailed procedural and safety guidelines

Working Conditions :

The worker is subject to outside environmental conditions : No effective protection from weather.

The worker is subject to both environmental conditions : Activities occur inside and outside.

The worker is subject to extreme cold : Temperatures typically below 32 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions such as wind and humidity.

The worker is subject to extreme heat : Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions such as wind and humidity.

The worker is subject to noise : There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level.

The worker is subject to vibration : Exposure to oscillating movements of the extremities or whole body.

The worker is subject to hazards : Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals.

The worker is subject to atmospheric conditions : One or more of the following conditions that affect the respiratory system of the skin : Fumes, odors, dusts, mists, gases or poor ventilation.

The worker is subject to oils : There is air and / or skin exposure to oils and other cutting fluids.

The worker is required to function in narrow aisles or passageways.

Physical Requirements :

Heavy work : Exerting up to 100 pounds of force occasionally, and / or up to 50 pounds of force frequently, and / or up to 20 pounds of force constantly to move objects.

Climbing : Ascending or descending ladders, stairs, scaffolding, ramps, poles and the like, using feet and legs and / or hands and arms. Body agility is emphasized. This factor is important if the amount and kind of climbing required exceeds that required for ordinary locomotion.

Balancing : Maintaining body equilibrium to prevent falling when walking, standing or crouching on narrow, slippery or erratically moving surfaces. This factor is important if the amount and kind of balancing the amount and kind of balancing exceeds that needed for ordinary locomotion and maintenance of body equilibrium.

Stooping : Bending body downward and forward by bending spine at the waist. This factor is important if it occurs to a considerable degree and requires full use of the lower extremities and back muscles

Kneeling : Bending legs at knee to come to a rest on knee or knees.

Crouching : Bending the body downward and forward by bending leg and spine.

Crawling : Moving about on hands and knees or hands and feet.

Reaching : Extending hand(s) and arm(s) in any direction.

Standing : Remaining upright on the feet, particularly for sustained periods of time

Walking : Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another

Pushing : Using upper extremities to press against something with steady force in order to thrust forward, downward or outward.

Pulling : Using upper extremities to exert force in order to draw, drag, haul or tug objects in a sustained motion.

Lifting : Raising objects from a lower to a higher position or moving objects horizontally from position to-position. This factor is important if it occurs to a considerable degree and requires the substantial use of the upper extremities and back muscles

Fingering : Picking, pinching, typing or otherwise working, primarily with fingers rather than with whole hand or arm as in handling.

Grasping : Applying pressure to an object with the fingers and palm

Feeling : Perceiving attributes of objects, such as size, shape, temperature or texture by touching with skin, particularly that of fingertips.

Talking : Expressing or exchanging ideas by means of the spoken word; those activities where detailed or important spoken instructions must be conveyed to other workers accurately, loudly, or quickly

Hearing : Perceiving the nature of sounds at normal speaking levels with or without correction, and having the ability to receive detailed information through oral communication, and making fine discriminations in sound.

Repetitive motions : Making substantial movements (motions) of the wrists, hands, and / or fingers .