Spacecraft Thermal Engineer

The Aerospace Corporation
Chantilly, VA
$117.3K-$226.9K a year
Full-time

The Aerospace Corporation is the trusted partner to the nation’s space programs, solving the hardest problems and providing unmatched technical expertise.

As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers.

When you join our team, you’ll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space.

At Aerospace, we are committed to providing an inclusive and diverse workplace for all employees to share in our common passion and aspiration to carry out a mission much bigger than ourselves.

Job Summary

The Vehicle Systems Division (VSD) sits at the center of the ideas and data behind current and future systems supplying innovative research and development;

technical evaluations during the acquisition process; conceptual and detailed design; assembly, integration, and test; and operational support.

  • Comprised primarily of highly-trained mechanical and aerospace engineers, VSD provides national expertise in the areas of vehicle engineering;
  • guidance, navigation, and controls; robotics; electro-mechanical devices; embedded systems; fluid mechanics; propulsion;

thermal control; orbital mechanics; mechanisms; structures; structural dynamics; and dynamic environments.

The Thermal Control Department is a team of experienced, trusted engineers with deep expertise in the design and analysis of spacecraft thermal control systems from component to system level.

The department performs technical studies, experimental investigations, and real-time assessments to inform and enablekey decisions by our customers and their contractors.

As the Spacecraft Thermal Engineer (Engineering Specialist / Senior Engineering Specialist - Aeronautical and Mechanical Engineering) , you should have a strong background in the disciplines of heat transfer and thermal engineering and their applications to space systems;

and direct experience in thermal design and control of spacecraft.S / He will support both classified and unclassified spacecraft programs with emphasis on classified systems.

The successful applicant will engage and advocate for the best solutions, best practices, and best innovationsfor critical thermal control issues across the enterprise,both inside and outside the organization.

Work Model

This is a full-time position based in El Segundo, CA or Chantilly, VA, offering a hybrid work model that combines (4) regular onsite workdays and remote flexibility as the business needs allow.

What You’ll Be Doing

Key customers are internal program offices representing defense and civil agencies, such as the U.S. Space Force, the National Reconnaissance Office (NRO), the National Aeronautics and Space Administration (NASA), and others.

You will engage with impact with these internal and external customers to identify, track, and resolve design, workmanship, and performance issues relating to space vehicle and payload thermal control subsystems.

You will deliver results as the thermal subject matter expert in thermal control systems for spacecraft and payloads. Lead and conduct analysis, modeling, simulation, experimental investigations, and assessments of designs and design concepts relating to spacecraft thermal control systems and their components.

Participate in and review thermal subsystem requirements, allocations, design, integration, test, and flight operations.

You will operate strategically, curating department knowledge and capabilities in thermal systems engineering, thermal analysis and design, and / or thermal control hardware.

You will provide thermal engineering technical leadership of teams of 2 or more people in support of programs, inter-department projects, and broad engagement efforts.

You should have strong people management skills which includes : training, motivating and directing employees to optimize workplace productivity and promote professional growth

What You Need to be Successful

Minimum Requirements for the Engineering Specialist - Aeronautical and Mechanical Engineering include :

Bachelor’s degree in mechanical or aerospace engineering or closely related field with emphasis in heat transfer or thermal sciences is required

A minimum of (8) years thermal engineering experience is required

Experience with the design, analysis, manufacturing, testing, and operation of spacecraft thermal control systems for all relevant modes of heat transfer, both active and passive, and through all phases of program lifecycle

Experience with SINDA / FLUINT and Thermal Desktop software; other applicable software includes TSS, EES, SolidWorks, SpaceClaim, CAMEO, and scripting languages such as FORTRAN and Python

Experience with thermal vacuum (TVAC), thermal cycle, and other environmental test programs

Demonstrated initiative and excellent leadership skills, with proven ability to build and manage effective engineering teams of (2) or more people with delivery of expected results

Willingness to occasionally travelto customer or contractor facilities approximately10% time

This position requires a current and active Secret security clearance, which is issued by the U.S. government. The ability to obtain and maintain a TS / SCIsecurity clearancewill be required(applicant will be submitted for this clearance upon hiring if they do not currently possess it).

U.S. citizenship is required to obtain a security clearance.

In addition to the above, the minimum requirements for the Senior Engineering Specialist - Aeronautical and Mechanical Engineering include :

12)+ years thermal engineering experience is preferred

Have provided thermal engineering support at a system level for at least 3 different spacecraft programs, encompassing at least two major phases (e.

g., Architecture, Design, Manufacturing, Test, Flight) for each program

Experience leading integrated-team thermal engineering efforts : innovation projects, concurrent engineering, digital engineering, vehicle-level thermal design, hosted or multiple-payload missions, anomaly and root-cause investigation involving 3 or more people

How You Can Stand Out

It would be impressive if you have one or more of these :

Advanced degree in mechanical or aerospace engineering or closely related field with emphasis in heat transfer or thermal sciences is preferred

15)+ years direct spacecraft thermal engineering experience is highly desirable

Deep knowledge of cryogenics, two-phase thermophysics, or thermodynamics is strongly preferred

Experience in adjacent engineering disciplines for spaceflight hardware : systems engineering, control systems, fluid or propulsion systems, power systems, flight software and telemetry systems, integration and test is preferred

Current and active TS / SCI clearance (SSBI), which is issued by the U.S. government, is strongly preferred. U.S citizenship is required to obtain a security clearance.

We offer a competitive compensation package where you’ll be rewarded based on your performance and recognized for the value you bring to our business.

The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills.

Min - Max)

$117,300 - $226,900Pay Basis : Annual

Leadership Competencies

Our leadership philosophy is simple : every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people.

To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who :

  • Operate Strategically
  • Lead Change
  • Engage with Impact
  • Foster Innovation
  • Deliver Results

Ways We Reward Our Employees

During your interview process, our team will provide details of our industry-leading benefits.

Benefits vary and are applicable based on Job Type. A few highlights include :

Comprehensive health care and wellness plans

Paid holidays, sick time, and vacation

Standard and alternate work schedules, including telework options

401(k) Plan Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions;

employees are immediately eligible and vested in the plan upon hire

Flexible spending accounts

Variable pay program for exceptional contributions

Relocation assistance

Professional growth and development programs to help advance your career

Education assistance programs

An inclusive work environment built on teamwork, flexibility, and respect

We are all unique, from diverse backgrounds and all walks of life, yet one thing bonds all of us to each other the belief that we can make a difference.

This core belief empowers us to do our best work at The Aerospace Corporation.

30+ days ago
Related jobs
Promoted
The Aerospace Corporation
Chantilly, Virginia

Experience leading integrated-team thermal engineering efforts: innovation projects, concurrent engineering, digital engineering, vehicle-level thermal design, hosted or multiple-payload missions, anomaly and root-cause investigation. Engineering Specialist / Senior Engineering Specialist. Lead and ...

Promoted
Blue Origin
Reston, Virginia

Provide thermal engineering leadership & support for thermal hardware design, documentation (drawings and model based designs), procurement, planning, procedural & operations support of Spacecraft assembly, integration & test (AI&T) efforts. As part of a hardworking team of diverse specialists, tech...

SAIC
Chantilly, Virginia

Spacecraft Thermal Engineering. S&L provides technical and programmatic support to coordinate and execute acquisition, vehicle engineering, adjunct payload accommodation, and integration, test and launch functions for spacecraft and adjunct payloads. In this role, you will be an integral partici...

The Aerospace Corporation
Chantilly, Virginia

Spacecraft Thermal Engineer (Engineering Specialist / Senior Engineering Specialist - Aeronautical and Mechanical Engineering). Experience leading integrated-team thermal engineering efforts: innovation projects, concurrent engineering, digital engineering, vehicle-level thermal design, hosted or mu...

Promoted
The Aerospace Corporation
Chantilly, Virginia

The Aerospace Corporation is the trusted partner to the nation’s space programs, solving the hardest problems and providing unmatched technical expertise. At Aerospace, we are committed to providing an inclusive and diverse workplace for all employees to share in our common passion and aspiration – ...

Promoted
Ultra Maritime, LLC
Chantilly, Virginia

The Project/Systems Engineering function in Ultra provides expertise to all projects through the bid and full development lifecycle. Working closely with RF, Mechanical, Electrical, and Software Engineers, the System Engineer will guide the continued development of the Radar System from design updat...

Promoted
Diversified
Sterling, Virginia

JobPosting","title":"Sales Design Engineer","datePosted":"2024-10-09T01:00:00","validThrough":null,"description":"\n\nWhat part will you play?\n\n\nThe Sales Design Engineer (SDE) will collaborate with Account Executives and provide the technical expertise during the pre-sales process for opportunit...

Promoted
WR Systems
Fairfax, Virginia

Ability to obtain and maintain a Secret Clearance.Willingness to travel to customer locations as project demands....

Promoted
Citizant
Chantilly, Virginia
Remote

As a Computer Systems Engineer/Architect Subject Matter Expert, you will play a crucial role in designing, implementing, and optimizing advanced computer systems and architectures. Continuous Improvement: Stay abreast of industry trends, advancements, and best practices in computer systems engineeri...

Promoted
Booz Allen Hamilton
McLean, Virginia

Applies engineering physics, engineering mathematics, and materials science principles to support the design, analysis, manufacture, or maintenance of mechanical systems. Bachelor's degree in Mechanical Engineering. Ability to use a broad range of engineering tools, including SolidWorks, Matlab, Pyt...