Industrial Maintenance Team Member

TG Missouri Corporation is seeking evening and night shift Industrial Maintenance Team Members for the Perryville, MO facility.

SUMMARY

Performs preventive, corrective and predictive maintenance to injection molding machines, automated and manned paint booths, robots, extruder systems, diecasting assembly machines and all associated support equipment.

Conduct and document water and air quality test, use precision test and measuring equipment. Handles and stores chemicals and industrial lubricants.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

Is knowledgeable in all aspects of basic hand tools and proper use.

Is knowledgeable in the use of the NEC code book, the OSHA safety manual and general shop and electrical safety practices.

Is knowledgeable on the proper inspection, removal, installation and alignment and lubrication of bearings, gears, belts and chains.

Is able to troubleshoot and repair complex electrical systems.

Is able to troubleshoot and repair complex electronic systems at a component level.

Is knowledgeable in AC and DC theory, various PLC programming to include : Omron, Allen Bradley, Siemens, Toshiba, Mitsubishi, Texas Instruments, Bosh, Keba, Yokogawa and Meiki.

Trouble shooting and programming knowledge of DC drives : Reliance SC 500, Danfoss, Woods, Omron, Siemens and Allen Bradley.

Temperature controller and Thermocouple knowledge required. Fluent in electronic schematics and terminology.

Is able to trouble shoot and repair complex hydraulic systems at a component level.

Is able to trouble shoot and repair complex pneumatic systems at a component level.

Is able to trouble shoot the control, injection, chilled water, hydraulic and pneumatic systems of polyurethane molding at a component level.

Is able to trouble shoot the control, injection, hydraulic and pneumatic systems of various injection machines at a component level to include the following manufacturers : Rauch, Buhler and UBE, as well as support robots from Rimrock.

Is able to trouble shoot the control, injection, hydraulic and pneumatic systems of various injection machines at a component level to include the following manufacturers : Krauss Maffie and Davis Standard, as well as the associated haul off conveyors, cooling systems and cutters.

Is knowledgeable in the access and manipulation of various plc programs for the following manufacturers : Nitoman, Panasonic, Omron, Zebra and Yokogawa.

EDUCATION and / or EXPERIENCE

Associate's degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and / or training;

or equivalent combination of education and experience.

Ability to apply concepts of basic algebra and geometry.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts.

• The employee is frequently exposed to risk of electrical shock. The employee is occasionally exposed to wet and / or humid conditions;
• high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme heat;

and vibration. The noise level in the work environment is usually moderate.