Assembler - 3rd Shift Production

kdc/one
Manitowoc, WI, USA
Full-time

Assembler - 3rd Shift Production

kdc / one Northern Labs, 5800 West Dr, Manitowoc, Wisconsin, United States of America Req #3755 Thursday, March 21, 2024

KDC is a network of best-in-class custom formulators and manufacturers of color cosmetics, skincare, haircare, bath & body, fragrance, deodorant, home, health, industrial, and auto care products.

KDC delivers high-touch innovation, operational excellence, and speed to market to well-known and emerging beauty, personal, and specialty companies from coast to coast.

KDC has its head office in Longueuil, Québec. In addition, KDC has 10 operating facilities located throughout North America.

Altogether, the company employs nearly 4,800 talented and dedicated employees in North America.

Job Title : Assembler

Reports To : Production Supervisor / Line Leader

Job category : Individual contributor Management

Division : Home Care

Department : Production

Location : Manitowoc, WI

Description / Scope / Mission

To assist the Line Leader in the production of a quality product at specified quantities in a safe and cost-effective manner.

Key Responsibilities / Accountabilities

  • Check the correct identity, quality and appearance of materials, components, supplies and products. Checking correct identity, appearance, components and products is important to assure the correct product is in the correct bottle and / or box.
  • Maintain established quality standards, reporting quality defects to the Line Leader to assure poor quality product is not going into the carton.
  • Maintain a clean and neat work area. This is especially important for safety reasons. A clean and neat work area reduces the possibility of an accident.
  • Follow all safety procedures.
  • Execute special assignments required by Management.
  • All responsibilities detailed below.

RESPONSIBILITIES BY LINE POSITION :

  • Bottle Position
  • Put bottles on line in a specified direction, watching for any noticeable defects. Must keep line full and watch for any bottles that fall over or get stuck on the track or filler.
  • Know where start / stop buttons are for filler and capper.
  • Make sure the bottles transfer on and off the filler.
  • Make sure the cap hopper is full of caps.
  • Dump bottles into bin and break down boxes if necessary.
  • If line goes down, clean up immediate area before table work. If there is a jam-up on filler, bottle person helps Line Leader clean the filler and empty unusable containers.
  • Must be lock out tag out to go inside the filler
  • Cap / Spray Nozzle Placement
  • Place spray nozzles and caps into / onto bottles and twist a couple times to set in place before torque machine.
  • When the line goes down the person should clean up area (caps on floor, bottles that were pulled off the line), fill and open cap / sprayer boxes.
  • Box Position
  • Assemble boxes correctly and quickly so line will be full of boxes at all times.
  • Box person will insert partitions if order requires partitions.
  • Box person keeps watch on capper for jam-ups, tipped bottles, no caps and cocked caps. If any of these things occur, the box person should notify the Line Leader immediately and go to the problem area and assist the Line Leader.

Example : pick up bottles, take bottles with no caps off line, etc.)

  • Box person should watch labeler for jam-ups. If they notice label rolls getting low, they should notify the Line Leader.
  • When the line goes down, they are to clean their work area. (Example : extra cardboard or bad cartons / partitions to scrap box empty pallets off line.

Box person also helps do table work when necessary.

  • Be ready to hit the emergency stop button if the line needs to be shut off.
  • Middle Packer
  • Middle packer packs bottles in boxes looking at every bottle per box for front and back labels and for codes.
  • Helps person on boxes keep up on boxes or partitions.
  • Person also can go and get boxes or partitions for box person.
  • For heat seal product, check one or two caps to see if heat seal is good.
  • Boxes are packed one-half full.
  • When in the position of the box maker, keep watch on the capper and labeler for problems.
  • End Packer
  • End packer packs the remaining bottles into the boxes.
  • If applicable, sprayers, caps, and MSDS sheets are packed into each box.
  • Fold flaps down on boxes and push the filled box through the carton sealer.
  • Need to keep an eye on the track at end of line in case it becomes full. Palletizer is notified.
  • Watch for boxes going through taper in case they tip over.
  • If there is a problem on lines end packer should hit emergency stop immediately.

MARGINAL JOB DUTIES :

  • Emptying garbage cans.
  • Sweeping.
  • Washing tracks.

Education / Certification / Qualifications / Experience

High School, HSED preferred.

Experience :

None, helpful to have some factory experience.

LICENSE OR CERTIFICATION REQUIRED :

None

Specific Knowledge : (Technical / Product, Organizational and Interpersonal)

PHYSICAL DEMANDS :

  • Walk; reach above shoulders; climb or balance; stoop, kneel, crouch or crawl up to 1 / 3 of the time up to 48 .
  • Stand (all 8 hours / 10 hours of the shift or overtime as required); use hands to finger, handle or touch; and talk or hear 2 / 3 and more of the time.
  • Lift or force to be exerted up to 10 pounds 2 / 3 and more of the time.
  • Lift or force to be exerted up to 25 pounds 1 / 3 to 2 / 3 of the time.
  • Dumping bottles, dumping a box of empty bottles into the hopper. Boxes are large and awkward may have to lift overhead.

Occasionally work up to 10 + feet.

  • Close vision (clear vision at 20 inches or less).
  • Distance vision (clear vision at 20 feet or more).

TOOLS / EQUIPMENT USED :

Hand taper and possibly safety knife 1 / 3 to 2 / 3 of the time.

WORK ENVIRONMENT / PPE REQUIRED :

  • Exposure to various chemicals 2 / 3 and more of the time.
  • Work near moving mechanical parts 2 / 3 and more of the time.
  • Moderate noise level 2 / 3 of the time during normal line duties.
  • Loud noise level 1 / 3 of the time from running motors form surrounding machinery.
  • PPE is required on specific jobs and when PPE is required, the LOI will specify what is needed.

COMMENTS

Always know where the emergency stop buttons are, be aware of your surroundings. Be prepared for your next position on the job and know what the responsibilities are before you get there.

KDC-ONE is an equal opportunity employer and does not discriminate on the basis of race, religion, color, national origin, age, sex, gender, disability or any other characteristic protected by law.

I understand that employment with KDC-ONE Company is at-will, meaning that I or KDC-ONE Company may terminate my employment at any time, or for any reason consistent with applicable state or federal law.

I understand that KDC-One requires the successful completion of a drug and / or alcohol test as a condition of employment.

Other details

  • Pay Type Hourly
  • Employment Indicator Direct
  • kdc / one Northern Labs, 5800 West Dr, Manitowoc, Wisconsin, United States of America

Share this job :

30+ days ago
Related jobs
kdc/one
Manitowoc, Wisconsin

Assembler - 3rd Shift Production. Production Supervisor/Line Leader. To assist the Line Leader in the production of a quality product at specified quantities in a safe and cost-effective manner. Stand (all 8 hours/10 hours of the shift or overtime as required); use hands to finger, handle or touch; ...

saint_gobain_group
Estados Unidos , Wisconsin

This is for 3rd shift (Sunday night - Friday morning, 10:15pm - 6:45am). You will also work with closely with the Manufacturing Technician team, Maintenance team and Production Leads to ensure consistent and efficient operation of equipment to meet daily safety, quality, and production goals. In thi...

Alpha Baking
Manitowoc, Wisconsin

Headquartered in Chicago, Alpha Baking has three production plants in Illinois and others in Indiana, Michigan, and Wisconsin. ...

certainteed
Estados Unidos , Wisconsin

Manufacturing Associate 3rd Shift. Shift: 9:00pm-7:00am CST with voluntary OT on Saturday. Maintains quality of the product on the production line by ensuring product standards are being followed. Tracks and/or fills out metrics required to accurately close out production work orders. ...

Alpha Baking
Manitowoc, Wisconsin

Ensures the preparation of quality baked goods (bread, buns) by working on the production line in a variety of different areas as described below. Assists in the production of quality dough. Maintains efficient conveyor system for bread production. ...

Alpha Baking
Manitowoc, Wisconsin

Headquartered in Chicago, Alpha Baking has three production plants in Illinois and others in Indiana, Michigan, and Wisconsin. ...

kdc/one
Manitowoc, Wisconsin

Production Line Leader - 3rd Shift. Production Line Leader - 3rd Shift. Responsible for filling Assemblers ensuring all tasks and duties are fulfilled in the operation of producing a quality product at specified quantities in a safe and cost-effective manner. Develop, maintain, and improve pre and p...

Alpha Baking
Manitowoc, Wisconsin

Ensures the preparation of quality baked goods (bread, buns) by working on the production line in a variety of different areas as described below. Assists in the production of quality dough. Maintains efficient conveyor system for bread production. ...

kdc/one
Manitowoc, Wisconsin

PRODUCTION LINE LEADER - 1ST AND 3RD SHIFT. Responsible for filling Assemblers ensuring all tasks and duties are fulfilled in the operation of producing a quality product at specified quantities in a safe and cost-effective manner. Develop, maintain, and improve pre and postproduction checklists det...

saint_gobain_group
Estados Unidos , Wisconsin

This position is for PC1 3rd shift and working hours are Sunday night to Friday morning 10:15pm - 6:45am. ...