Job Description
Exercise judgment to plan and perform a sequence of operations in the installation, maintenance and repair of a wide variety of HVAC equipment, including refrigeration equipment.
Qualifications An advanced knowledge of the operation and repair of HVAC systems equivalent to 1-2 years practical trades training or previous work experience is required.
Must be certified to recover and purchase refrigerants.
At least 2 years additional practical experience is required.
Must provide own hand tools.
A valid driver’s license is required; ability to drive both a manual and automatic transmission vehicles. Job Specific Qualifications Responsibilities Trouble shoot, diagnose and repair / replace pneumatic, electric and air conditioning, refrigeration and ventilating equipment.
Remove, repair and install compressors, blowers, burners, motors, fans and drive equipment, belts, bearing, etc.
Oil and grease motors and associated compressor equipment.
May be required to perform duties of Steamfitter. Physical Requirements
- Standing 65% 90% of the shift
- Frequent bending at the waist; able to bend to below the knee (50% 80% of shift)
- Frequent stooping and / or crouching (50% 80% of shift)
- Frequent twisting and bending of head, neck, and torso (75% 95% of shift)
- Full range of arm movement (extension, twisting, and bending of arm and shoulder, reaching overhead, etc. (50% 95%)
- Visual and cognitive capability sufficient to troubleshoot and diagnose problems and make repairs; able to read and interpret blueprints
- Wrist and finger dexterity sufficient to use and operate a variety of hand tools, run wiring etc.
- May need to work on a ladder, scaffolds, bucket truck, or at other elevated heights
- Able to drive vehicles with manual and automatic transmissions
- Able to climb up into and down from truck cab
- May be required to work in tight spaces
- Able to work in extreme heat and cold
- Able to lift up to 50 pounds
- Push / pull up to lbs.
- May be exposed to dust strong odors, chemicals, oils and solvents Tools / Equipment Operate test equipment including volt OHM meter, amprobe, recovery equipment and refrigeration gages.
Use a variety of electrical and hand tools including electrical pliers, screwdrivers, crescent wrenches, tube cutters, etc.