Job Overview
Electrical technicians are responsible for the assembly, installation or service of electrical components on Komatsu’s off-road mining equipment.
After training they must be able to perform this activity from technical schematics with minimal instruction.
Key Job Responsibilities
- Will perform various electrical assembly functions including the fabrication of electrical cable and harness structures.
- Performs all electrical tests, uses electronic checking devices, troubleshoots and does all electrical work as required with or without supervision.
- May perform various mechanical assembly functions, excluding the assembly of hydraulic systems of the equipment under the direction of a mechanical assembler.
- When safety is not a factor, may use stud welder.
- May use information systems, as necessary to perform job duties.
- Operates equipment and performs final inspection including appropriate documentation.
- May work on special or pilot models including major layout and assembly according to prints and verbal instructions.
- May work closely with Engineering Department.
- Works from engineering prints, routings, and procedures with minimum supervision.
- Will be responsible for quality and safety of own work including the utilization of appropriate protective equipment.
- With train others as directed.
Qualifications / Requirements
LEVEL 1 candidates will demonstrate electrical aptitude as documented. Must have completed a post high school electrical program and 1 year of applicable experience utilizing schematics and blueprints for troubleshooting and repair of electronics.
Documented experience in electrical wiring in the automotive / truck, aircraft, marine or agricultural implement industries.
Documented expertise in the use of a digital volt meter.
LEVEL 2 candidates must have completed a post high school electrical program.
- Must pass appropriate test.
Electrical Assembler Technician Apprentice
Electrical technicians are responsible for the assembly, installation or service of electrical components on Komatsu’s off-road mining equipment. Will perform various electrical assembly functions including the fabrication of electrical cable and harness structures. Performs all electrical tests, us...
Mechanical Assembler Technician Apprentice
Under the direction of an Electrical Assembler, may install harness structures, cables, and power cables, but may not make final connections. Komatsu’s Mechanical Assemblers perform a wide range of component and final assembly work in the production of Komatsu’s off-road mining trucks. Will perform ...
Assembler-Power Systems
Monday - Friday, 6:00am - 2:30pm .Assemble steel enclosures using shop tools, basic wiring, and material handling.Perform other warehouse duties as assigned.High School Diploma or equivalent required.Knowledge of engineering drawings preferred.Previous experience using hand ...
Maintenance Technician II
Provides assistance to lower level technicians and leadership to small teams. Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. ...
Lead Cold Header Machine Operator
The cold heading lead machine setup operator will report to the production supervisor and plant manager. The position’s primary responsibility will be the setup, operation, and troubleshooting of cold header machines. Header operator experience, preferably in the Fastener Industry. ...
Maintenance Technician/Mechanic
Conduct routine inspections and preventive maintenance. Industrial Maintenance Technician. ...
Maintenance Technician - 4/10hr days (Mon-Thurs + potential OT)
Maintenance Technician is responsible for performing general maintenance and repair of production machinery. Position is intended to be long-term, training under the current Maintenance Supervisor, with an intent to assume the role of Maintenance Supervisor upon his departure. Technician for the fol...
Maintenance Technician I
Associates degree with a Technical focus or 18 months of related experience in general industry or successful completion of the ATS Technician Progression Program. ...
Assembler-Power Systems
Monday - Friday, 6:00am - 2:30pm .Assemble steel enclosures using shop tools, basic wiring, and material handling.Perform other warehouse duties as assigned.High School Diploma or equivalent required.Knowledge of engineering drawings preferred.Previous experience using hand tools and various shop to...
Apartment Maintenance Technician - (With Apartment)
Reporting to the Director of Housing; the Apartment Maintenance Technician is primarily responsible for assisting in all aspects of facility maintenance, renovation, and repairs. The Maintenance Technician serves in an on-call rotation for maintenance emergencies 24 hours per day, 7 days per week, o...