Description
Primarily responsible for performing a variety of routine building maintenance tasks in carpentry, painting, electrical, heating, HVAC, and plumbing.
The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.
Position Responsibilities :
Ensures operating efficiency of heating equipment, chillers (air and / or water cooled), DX units, pumps, fan coil units, VAV, and air distribution systems.
Monitor and inspect all mechanical / pneumatic equipment, valves, thermostats, diffusers,
Maintain, repair, and troubleshoot equipment including changing filters, cleaning coils, flushing condensers as required.
Repair various light fixtures and hardware such as doors, ceilings, hand railings, and floors
Install, reinstall and / or replace signage.
Assembles, installs, repairs and / or replaces plumbing fixtures related to, urinals, flush valve assemblies and lavatories.
Maintain mechanical / breaker rooms safe clean and clear of obstructions and debris.
Ensure 24-hour emergency coverage for the building when on call.
Responds immediately to emergency situations (fire, evacuation, equipment failure, etc.)
Monitors fire and life safety inspections and schedule repairs / inspections as needed or as required per code.
Complies with all safety, health, environmental, and quality programs and policies.
Oversee and inspect work performed by third party contractors in compliance with building codes and safety regulations.
Performs routine maintenance of emergency exit signs and lights and ensures conditions are safe and clear.
Observes and follows all safety rules and procedures, including wearing required personal safety equipment.
Maintains a friendly, efficient, positive customer service demeanor towards customers, clients, and coworkers.
Performs additional duties and projects as assigned.
Qualifications
High school diploma or general education degree (GED) is preferred.
Valid Driver’s License is required and must be active and validated.
A minimum of one (1) year of related experience
Basic knowledge in troubleshooting HVAC systems.
Basic experience in electrical, plumbing, carpentry, and construction
Ability to prioritize tasks, work effectively under stress, and meet short deadlines.
Must have basic computer skills.
Must be or be capable of becoming a certified forklift operator
Must be or be capable of becoming a certified Aerial lift operator
Painting abilities a plus
This job posting will remain open a minimum of 72 hours and on an ongoing basis until filled
EEO / Minorities / Females / Disabled / Veterans
Job Craft
Primary Location US-TX-Houston
Schedule : Full-time
Travel : No
Req ID : 241975
Job Hire Type Experienced #LI-DNI #CSP N / A
Maintenance Technician (Pearland, TX)
Primarily responsible for performing a variety of routine building maintenance tasks in carpentry, painting, electrical, heating, HVAC, and plumbing. Performs routine maintenance of emergency exit signs and lights and ensures conditions are safe and clear. ...
Mid Level Automotive Technician - Pearland, TX
Automotive Technician, Diesel Mechanic, General Mechanic, Brake Technician, Transmission Technician, Engine Mechanic, Electrical Mechanic, Master Technician, Certified Automotive Technician (ASE), L1 Technician, L2 Technician, L3 Technician, Mechanic, Automotive Service Technician, General Service T...
Maintenance Technician I (Houston, Tx)
Provide accurate and timely writtenreports of safety, and operational and maintenance issues. Interpret data and suggestmaintenance schedule/activity adjustments to the Manager. Ensure all Preventative andPredictive Maintenance practices and procedures are followed. Maintenance workflow training(sch...
Fuels Systems Maintenance and Repair Technician -AR, LA, OK, TX-
AR,LA,OK,TX with a minimum of 5 years of experience with the mechanical fueling system maintenance and repair related to the sustainment, restoration and modernization of petroleum handling systems. The selected candidate will serve as Tetra Tech’s agent for all recurring maintenance and repair acti...
Utility Maintenance Worker- Distribution and Collections
The City of Pearland offers life-work balance, safety, security and stability with the opportunity to work locally. Utility Maintenance Worker - Distribution and Collections. The City of Pearland has received a. Pearland is one of the fastest-growing cities in Texas due to affordable housing, outsta...
Maintenance Technician - Houston, TX
Assist with the scheduling and performance of all maintenance/repair-related turn events. Perform swimming pool maintenance and cleaning and maintain accurate, timely chemical logs. Maintain preventative maintenance program that extends the life of the community while minimizing future repairs. Main...
Maintenance Technician - Centre at Columbia Court - Houston, TX
Here are some responsibilities for the potential Maintenance Technician: . Apply your maintenance skills/background to help support the maintenance team members as well as the property itself. Completes all maintenance service requests including basic general repairs such as drywall, painting, carpe...
Floating Maintenance Technician - Houston, TX
The Maintenance Technician is responsible for assisting in carrying out the maintenance processes of the property, including corrective, preventative, routine, emergency, and cosmetic maintenance. The Maintenance Technician is also responsible for the make-ready process in a manner consistent with t...
Floating Maintenance Technician - Houston, TX
Assist with the scheduling and performance of all maintenance/repair-related turn events. Perform swimming pool maintenance and cleaning and maintain accurate, timely chemical logs. Maintain preventative maintenance program that extends the life of the community while minimizing future repairs. Main...
CNC Maintenance Technician 2nd Shift (CWI) - Houston, TX
Responsible for the maintenance and repair of all machines and equipment to manufactures recommendations. Ability to diagnose/troubleshoot maintenance repairs and malfunctions. Preventative Maintenance of all machines & equipment. ...