Essential Job Functions / Responsibilities
Manufacturing firm is searching for a qualified candidate to perform NDE on ASME Section III, Section VIII Vessels and nuclear power plant components.
Experience in working with the following codes / standards : ASME, AWS, ISO and other standards are desired. Job requires potential overnight travel and will require off shift work.
- Adherence to safety procedures / guidelines at all times.
- Maintain safety precautions at all times.
- Keep work area in a clean and orderly condition.
- Perform specific inspections and specific evaluations for acceptance or rejection determinations according to written instructions and to record results.
- Perform NDE Examinations in conjunction with receipt and in-process inspections on material purchased for use in fabrication.
- Familiar with the tools and equipment and shall have demonstrated proficiency in their use.
- Capable of determining the calibration status of inspection and measuring equipment is in proper condition for use, and that inspection, examination and test procedures are approved.
- Capable of assisting production in the set-up of material and / or components for receipt inspection, as required.
- Train other individuals as required by management.
Physical Demands & Abilities
- Must demonstrate the ability to read the equivalent of the size and letters of the Jaeger I chart at a minimum distance of 12 inches and distinguish and differentiate the contrasts between colors illustrated on an Ishihara Test Chart.
- Inspection personnel performing work on elevated surfaces shall be capable of wearing the required fall protection equipment.
- Inspection personnel shall be able to lift, carry, push, pull or otherwise move objects weighing up to 50 pounds
- Will work in various areas of the plant location. Dependent upon the area, environmental conditions can be hot, cold, dirty, greasy, wet and noisy.
- May work alone with minimal supervision or with other personnel.
- Inspection personnel shall possess fundamental written and verbal communication skills.
- Inspection personnel shall be fluent (written and verbal) in the English language.
- Computer skills, especially familiarity with MS Office applications, are necessary.
- Comfortable working in fast paced team environment
Supports :
Quality Control Manager, Shop Managers, Quality Control Supervisor, Production Supervisors, Product Line Managers
Required education :
- Required : High School diploma or equivalent with at least 3 years of inspection related experience.
- Preferred : 2 years of inspection related experience with a completion of 2 years of college in technical or engineering related discipline from a university, college, or technical school.
- Preferred : 1 year of inspection related experience with a degree in engineering or science from a university or accredited college.
Minimum and Preferred Qualifications :
- Must be qualified and certified to ASNT-TC-1A in two or more of the following NDT Methods that will be utilized : Visual Examination (VT)Liquid Penetrant (PT)
- Preferred candidate will be a Certified Level II Visual Examination (VT) and Liquid Penetrant (PT)
Required Licenses or Certifications :
- Valid Driver's License
- Previous Level II Certification to ASNT-TC-1A including documented objective evidence of classroom and on the job training experience Job Type :
- Full-time
- Full-time
30+ days ago