Search jobs > Sunnyvale, CA > Sr design engineer

Sr. RFIC - PLL Design Engineer

Apple Inc.
Sunnyvale, California, US
Full-time

Would you like to join Apple’s growing wireless silicon development team? The wireless RFIC team architects, designs, and validates radio transceivers integrated into complex wireless SoCs.

Our wireless organization is responsible for all aspects of wireless silicon development that transform the user experience at the product level, all of which is driven by a best-in-class vertically integrated engineering team spanning RF / Analog architecture and design, Systems / PHY / MAC architecture and design, VLSI / RTL design and integration, Emulation, Design Verification, Test and Validation, and FW / SW engineering.

As Sr. RFIC - PLL Design Engineer within the Wireless Radio team, you will be at the center of a wireless SoC design group with a critical impact on getting Apple’s state-of-the-art wireless connectivity solutions into hundreds of millions of products.

Any additional information you require for this job can be found in the below text Make sure to read thoroughly, then apply.

Description

As a Senior RFIC-PLL Designer, you are going to be responsible for providing analog and digital PLL solutions for wireless SoC and driving them to mass production for Apple’s Wireless Connectivity products.

Responsibilities include :

  • Lead design of radio transceiver chains including analog PLLs - VCOs, digital PLLs - DCOs, LOGen, and chain of blocks in RX, and TX for wireless connectivity products.
  • Drive radio KPI (power, area, performance) to meet product requirements.
  • Work with cross-functional teams including platform architecture, wireless design, RF HW and SW to define radio features enabling wireless innovation.
  • Work closely with RF Systems in block level and high level specifications of the PLL-LOGen, TX and RX line ups, and proper distribution of spec margins in the chain.
  • Hands-on design contributions starting from concept, architecture and topology to transistor-level feasibility studies and KPI trade-off analysis to actual design, simulations and extractions.
  • Design of RF and Analog loopbacks for calibration and compensation.
  • Work through Co-Existence scenarios and design to meet the CoEx requirements.
  • Oversee the floorplan layout and verification of the design to ensure a successful tape-out.
  • Close collaboration with RFIC test engineers in the bring up, debug and optimization of the wireless connectivity chip through the productization.
  • Provide design versus silicon measurements correlation, and compliance with specification for a volume production.

Minimum Qualifications

Key Qualifications

  • Typically requires 10+ years of RF / analog and mixed-signal design experience in cutting-edge RF CMOS design.
  • Direct experience in designing and bringing into mass production of wireless transceivers in deep sub-micron RFCMOS technology.
  • Experienced in design and development of fractional N Synthesizers, Digital PLLs, Analog PLLs, LO-Gen for high performance application and also low power application.
  • Hands-on experience in designing TDC, GRO, Digital Filters, Sigma Delta Modulators, Pre-scalers and MMD, DCOs, PFD-CP, and VCOs.

Modeling, analysis and design of SD noise cancellation and spur cancellation techniques.

  • Deep understanding of analog, mixed-signal and RF circuit design. This includes LNAs, PAs, mixers, baseband filters, VGAs and calibration methods associated with high performance wireless systems.
  • Familiarity with various RF transceiver architectures and their trade-offs, system specifications and ability to work with system architects to translate system requirements into circuit requirements at IC level.
  • Experienced in Cadence Virtuoso, Spectre RF, Matlab, EM simulation (EMX, HFSS) and similar tools.
  • Familiarity with mixed-signal mode verification methodology (SystemVerilog, AMS, Nanotime).
  • Demonstrated capability to work with digital design group for an optimum partition between digital and analog domain, timing requirements.
  • Extensive experience in fractional N synthesizer and LOGen silicon characterization and debug.

Preferred Qualifications

Education & Experience

BS and 10+ years of relevant industry experience. MSEE and PhD is preferred.

Additional Requirements

Apple is an equal opportunity employer that is committed to inclusion and diversity. We also take affirmative action to offer employment and advancement opportunities to all applicants, including minorities, women, protected veterans, and individuals with disabilities.

J-18808-Ljbffr

2 days ago
Related jobs
Promoted
Apple
Sunnyvale, California

Our wireless organization is responsible for all aspects of wireless silicon development that transform the user experience at the product level, all of which is driven by a best-in-class vertically integrated engineering team spanning RF/Analog architecture and design, Systems/PHY/MAC architecture ...

Promoted
Socionext US
CA, United States

Front-End ASIC Design Engineer – Milpitas, CA. Front-End SoC/ASIC Design Engineer. Hands-on ASIC front-end design, ideally in design services environments (product backgrounds acceptable). Micro-architecture at module/sub-system/chip-level; digital design of complex modules/sub-systems, with solid u...

Promoted
New England Design & Construction
Palo Alto, California

Work closely with software, firmware, RF, antenna, digital, and mechanical design engineers to design and validate state-of-the-art spacecraft electronics. As a lead engineer, you will own the design of hardware platforms for radar, communications and compute that will be integrated into satellites ...

Promoted
Samsung Electronics GmbH
San Jose, California

Select your country or region to find out what content fits your location .Try using different or more general keywords.Find help about consumer storage product at samsung.By submitting this form, you are confirming you agree to share your personal information with Samsung to use for this business r...

Promoted
Tbwa Chiat/Day Inc
Redwood City, California

Strong understanding of mechanical engineering fundamentals, with experience in mechanism design and designing for strength and reliability. We are looking for a Senior Mechanical Engineer to support projects within the Hardware Design team, focusing on developing future products. As a Senior Mechan...

Promoted
Sanmina-SCI Systems de México
Fremont, California

Design and develop new data center racks, cabinets, and enclosure applications. Design and develop product configurations. Provide initial design concepts, including research of new components. Compile costs and lead times for non-recurring engineering charges. ...

Promoted
KLA
Milpitas, California

Enabling the movement towards advanced chip design, KLA's Global Products Group (GPG), which is responsible for creating all of KLA’s metrology and inspection products, is looking for the best and the brightest research scientist, software engineers, application development engineers, and senior pro...

SUMERU
Santa Clara, California

Design Engineer with one of our Direct Client in Santa Clara, CA. Design experience with high complexity design with. ...

Intuitive
Sunnyvale, California

Mechanical Engineer will be working with multi-disciplinary teams and guides cross-functional teams to maintain and improve the design, production, and service of the Ion System. In this role, you must utilize creativity and sound engineering judgment in the design of medical capital equipment, coll...

Sanmina
Fremont, California

Design and develop new data center racks, cabinets, and enclosure applications. Design and develop product configurations. Provide initial design concepts, including research of new components. Compiling costs and lead times for non-recurring engineering charges . ...