Job Description
Job Description
Summary
The QC Specialist is responsible for ensuring that incoming parts meet or exceed customer requirements. The incumbent also facilitates new part trials, investigates and reports defects to suppliers, processes quality documents, inputs inspection standards, reports to management on non-conformance trends, determines the department or supplier responsible for non-conformities, and requests corrective actions and containment for supplier defects.
Essential Functions (To perform within this position successfully, the incumbent must be able to perform each essential duty satisfactorily.
Other duties may be assigned.)
- Evaluate nonconforming material and report quality problems to management and relevant parties
- Assist in development and execution of containment and rework procedures for questionable product quality
- Create and process MQIRs (request for corrective actions) through the QMS system
- Read and interpret part drawings as defects arise to check part specifications and inform the supplier if a nonconformity is found
- Ensure that all non-conforming parts are entered into the SAP system and approve all inspection standards in QMS system
- Ensure that all inspection standards and documents are up-to-date with changes or revisions
- Create or update incoming inspection standards and periodic (regular) inspection schedule
- Perform process audits for supplier qualification or process changes
- Assist Manager with Initial Sample Inspection Report (ISIR) documents
- Schedule and facilitate trials for development parts and report results to manager and supplier
- Process ISIR documents for Engineering Order (EO) changes and 4M changes
- Claim defect parts for reimbursement, as well as 3rd party inspection invoices for overseas (Korean) parts
- Process chargeback claim / reclaim for quality-related lost time on production line or at Original Equipment Manufacturer (OEM)
- Provide continuous improvement through cost reduction methods and improvements in overall quality, process, and design
Supervisory Responsibilities : No
Basic Qualifications (The requirements listed below are representative of the knowledge, skills, and / or ability required and preferred for this position.)
Required Education & Experience :
Bachelor’s Degree in technical or related field
Required Knowledge, Skills, & Abilities :
- Critical thinking / Problem solving / Troubleshooting Skills
- Ability to organize time to accomplish desired results
- Strong Written and Verbal Communication Skills
- Proficient with Microsoft Word, Excel, and PowerPoint
- Good Presentation Skills
- Proficient mechanical inclination
Preferred Education & Experience :
- Bachelor’s Degree in Engineering or Engineering Technology
- Knowledge of Quality processes in manufacturing
- Experience in automotive manufacturing
Certificates, Licenses, and Registrations : None
Working Conditions :
- Normal Working Hours : 7 : 00 a.m.-4 : 00 p.m.
- Overtime as needed
- 50% office, 50% production floor
- Traversing around production floor
- Domestic and international travel
- Travel to OEM occasionally
- Lifting 20-30 lbs.
Company Description
Who is Hyundai MOBIS?
Hyundai MOBIS forms the parts and service arm for South Korean automakers Hyundai Motor Company, Genesis Motors, and Kia Motors.
- The company offers chassis, cockpit, and front-end modules; safety products, including airbags, headlights, anti-lock brake systems, and electronic stability control products;
- steering parts; multimedia systems; UVO systems; injection-molded plastic parts, such as instrument panels, carriers, and bumpers;
and steel wheel rims and decks. It also supplies after-sales service parts for vehicles. Concentrating its resources on after-sales parts, module parts manufacture, and parts export, Hyundai MOBIS has firmly established its position as one of the leading auto parts specialist companies in the world.
Hyundai MOBIS’s Module Division, of which MOBIS Alabama, LLC is part, has supplied the three major modules, chassis module, cockpit module, and front-end module, to automakers in the just-in-sequence (JIS) system.
Participating in the initial stages of a new vehicle development process, Hyundai MOBIS performs research and development of auto-parts, taking into account the specifications for modules, including designing and testing for production applications.
Through system integration of modularization, Hyundai MOBIS is contributing to increased competitiveness and in-sequence processing, reducing total weight and the number of parts needed.
This allows for easier assembly, effective inventory control, and cost reduction.
Who is MOBIS Alabama?
Established in 2002 and operating on nearly 83 acres in Montgomery, Alabama, MOBIS Alabama, LLC is the largest Tier 1 supplier to both Hyundai Motor Manufacturing Alabama (HMMA) and KIA Motor Manufacturing Georgia (KMMG).
With a commitment to quality, we pride ourselves on providing state-of-the-art Modules, Assemblies, and genuine Hyundai and KIA after-service parts.
We hold both the ISO14001 and IATF16949 Certifications for Environmental Management and Quality Management.
Our process begins in the sprawling 600,000 square-foot Plastics plant where we use injection molding to produce front and rear bumpers, instrument panel frames, and after-service parts.
Our bumpers are molded and painted in-house. Bumpers for HMMA are also assembled in-house before transfer to HMMA for final assembly, while bumpers for KMMG are sent to our sister plant in Georgia for assembly.
After molding, instrument panel frames move to the Module plant next door where we prepare them to receive additional parts to form a complete Cockpit (dashboard) assembly.
Also in the Module building are our front and rear Chassis (vehicle suspension) assembly lines. Here, parts from Tier 2 and 3 suppliers are assembled into completed Chassis modules which are transported to nearby HMMA for final vehicle assembly.
Our Redistribution Center (RDC) supplies genuine Hyundai and KIA after-service parts to dealerships, auto parts stores, and other parts distribution centers.
We receive parts from suppliers globally which are distributed across North America to satisfy our customers’ demand for high-quality automotive parts.
Company Description
Who is Hyundai MOBIS? r n r nHyundai MOBIS forms the parts and service arm for South Korean automakers Hyundai Motor Company, Genesis Motors, and Kia Motors.
- The company offers chassis, cockpit, and front-end modules; safety products, including airbags, headlights, anti-lock brake systems, and electronic stability control products;
- steering parts; multimedia systems; UVO systems; injection-molded plastic parts, such as instrument panels, carriers, and bumpers;
and steel wheel rims and decks. It also supplies after-sales service parts for vehicles. Concentrating its resources on after-sales parts, module parts manufacture, and parts export, Hyundai MOBIS has firmly established its position as one of the leading auto parts specialist companies in the world.
r n r nHyundai MOBIS’s Module Division, of which MOBIS Alabama, LLC is part, has supplied the three major modules, chassis module, cockpit module, and front-end module, to automakers in the just-in-sequence (JIS) system.
Participating in the initial stages of a new vehicle development process, Hyundai MOBIS performs research and development of auto-parts, taking into account the specifications for modules, including designing and testing for production applications.
Through system integration of modularization, Hyundai MOBIS is contributing to increased competitiveness and in-sequence processing, reducing total weight and the number of parts needed.
This allows for easier assembly, effective inventory control, and cost reduction. r n r nWho is MOBIS Alabama? r n r nEstablished in 2002 and operating on nearly 83 acres in Montgomery, Alabama, MOBIS Alabama, LLC is the largest Tier 1 supplier to both Hyundai Motor Manufacturing Alabama (HMMA) and KIA Motor Manufacturing Georgia (KMMG).
With a commitment to quality, we pride ourselves on providing state-of-the-art Modules, Assemblies, and genuine Hyundai and KIA after-service parts.
We hold both the ISO14001 and IATF16949 Certifications for Environmental Management and Quality Management. r n r nOur process begins in the sprawling 600,000 square-foot Plastics plant where we use injection molding to produce front and rear bumpers, instrument panel frames, and after-service parts.
Our bumpers are molded and painted in-house. Bumpers for HMMA are also assembled in-house before transfer to HMMA for final assembly, while bumpers for KMMG are sent to our sister plant in Georgia for assembly.
After molding, instrument panel frames move to the Module plant next door where we prepare them to receive additional parts to form a complete Cockpit (dashboard) assembly.
Also in the Module building are our front and rear Chassis (vehicle suspension) assembly lines. Here, parts from Tier 2 and 3 suppliers are assembled into completed Chassis modules which are transported to nearby HMMA for final vehicle assembly.
r n r nOur Redistribution Center (RDC) supplies genuine Hyundai and KIA after-service parts to dealerships, auto parts stores, and other parts distribution centers.
We receive parts from suppliers globally which are distributed across North America to satisfy our customers’ demand for high-quality automotive parts.