MAINTENANCE MECHANIC II

Veolia North America
Wyandotte, MI, United States
Full-time

Company Description

About Veolia North America

A subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery.

VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass.

Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our website www.veolianorthamerica.com.

Job Description

BENEFITS

Veolia's comprehensive benefits package includes paid time off policies, as well as

health, dental and vision insurance. In addition, employees are also entitled to

participate in an employer sponsored 401(k) plan, to save for retirement. Pay and

benefits for employees represented by a union are outlined in their collective

bargaining agreement.

Position Purpose :

Performs maintenance services, installation, or repairs in one or more skill areas such as plumbing, mechanical, electrical repairs, pneumatic, hydraulic, installation, carpentry, painting, or vehicle servicing.

Primary Duties / Responsibilities :

Performs routine and preventative maintenance, lubrication and minor adjustments on machines and related equipment which may include pumps, engines, centrifuges, generators, valves, gates, mixers, conveyors, blowers, dryers, chemical feed and odor control, disinfection equipment, vacuum filters, and belt presses.

Promptly reports any operational problems with machines or equipment to the Lead or Supervisor.

Learns to inspect and becomes proficient at mechanical troubleshooting to determine repairs needed. Dismantles equipment to gain access to and repairs defective parts using hand tools, power tools and precision measuring and testing devices.

Re-assembles and tests equipment ensuring safe and efficient operating conditions are restored. Learns to troubleshoot hydraulic, pneumatic, and electronic equipment and instrumentation.

  • Performs facility maintenance and repair and may replace or install light bulbs, fluorescent tubes, damaged glass, windows, doors, partitions, ceiling or floor tiles, door locks, carpet, and / or paint.
  • May perform manual labor including cleaning equipment, facilities and grounds as required and properly disposes of waste according to safety and environmental policies.

Operates vehicles for plant operational purposes.

Learns to estimate time and material costs for various projects. May assist in other areas of plant as directed.

Work Environment :

  • Spends 100% of the time in the operations environment.
  • Typically spends 25 - 35% of time exposed to outdoor and sometimes inclement weather.
  • Company service vehicles are used as required.
  • Travels 1 - 2 times per year for company provided training.
  • May serve rotational 24-hour emergency on-call.
  • Possible Work Hazards : May be exposed to possible operations hazards including fumes, dust, toxic and caustic chemicals, noise, rotating machinery, high pressure and hot and cold temperatures, slippery surfaces, water, and electrical hazards.

Qualifications

Education / Experience / Background :

  • High school or GED with the ability to read, write and comprehend English (operational, process, safety, and quality instructions) and be able to carry out verbal and written instructions.
  • Six months to two years of experience in a related position with ability to comprehend specifications, blueprints, and manuals.

Knowledge / Skills / Abilities :

  • Ability to perform basic mathematical calculations.
  • Some vocational training and mechanical aptitude preferred, with the ability to read, interpret and record data from meters, gauges, scales, panels, computer consoles and other equipment.
  • Experience using power, pneumatic, hydraulic, and hand tools and shop tools such as drill press, band saw, bench grinder, and torque wrench preferred.
  • Experience using material handling equipment, pressure gauges and precision measuring instruments.
  • Must have ability to operate Computer Maintenance Management System (software).
  • Must consistently demonstrate the ability to learn and independently perform assigned duties and meet or exceed production and quality goals.
  • Must demonstrate ability to work in a team environment and willingness to assume additional or new responsibilities readily.

Required Certification / Licenses / Training :

  • Minimum water / wastewater license as required by regulatory agency at site.
  • Must possess a valid driver's license and a safe driving record.
  • Employee Orientation, Departmental Operating Procedures, Safety, Confined Space training, OSHA, and Quality Training.
  • HAZWOPER (Hazardous Waste Operations and Emergency Response) Level I and II First Responder Certification if required by site.

Minimum water / wastewater operator state certification.

  • Must become proficient in the care and use of all site specific, facility required PPE (Personal Protection Equipment), including respirators, gas detectors, confined space equipment, etc.)
  • Forklift Certification if required by site.
  • Training in operation of mechanical drives, hydraulic pumps and valves, pneumatics, electronics, and control systems.
  • Obtain or maintain HVAC, Electrician, Plumber's, or other trade License if assigned to that area. Note : Tech will not perform duties unless properly licensed.
  • Training in the use of energy management systems as needed.
  • Works toward increasing skills in additional functional areas or in obtaining advanced skills / maintenance certifications.

Physical Requirements :

  • Amount of time spent - Standing 25%, Walking 75% for as many as five miles per shift.
  • Requires close visual and hearing observation to detect non-conformance and machine malfunction.
  • Constantly uses hands to finger, handle or feel and frequently reaches with hands and arms.
  • Works in various positions; works on ladders, catwalks, and supports at heights of 50 feet above the ground; and works with hands extended above and below head and body up to 40 minutes using hand tools weighing up to 15 pounds.
  • Must be able to lift and carry 50 pounds (occasionally 60 pounds) distances of 10 feet.
  • Occasional stooping, bending or kneeling and entering confined spaces.

Additional Information

We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

Disclaimer : The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

1 day ago
Related jobs
Veolia
Wyandotte, Michigan

Performs maintenance services, installation, or repairs in one or more skill areas such as plumbing, mechanical, electrical repairs, pneumatic, hydraulic, installation, carpentry, painting, or vehicle servicing. Performs routine and preventative maintenance, lubrication and minor adjustments on mach...

Cox Automotive
Carleton, Michigan

Automotive Maintenance Mechanic Technician II. Perform Preventive Maintenance: change oil, oil filter, fuel filter, transmission flush, and inspection of the vehicle for mechanical deficiencies. Based upon certification levels, perform various repairs and maintenance, which may include OBD II system...

Veolia North America
Wyandotte, Michigan

Performs maintenance services, installation, or repairs in one or more skill areas such as plumbing, mechanical, electrical repairs, pneumatic, hydraulic, installation, carpentry, painting, or vehicle servicing. Performs routine and preventative maintenance, lubrication and minor adjustments on mach...

Promoted
Kelly
Detroit, Michigan

The Maintenance Mechanic is a hands-on role, and the primary responsibilities are to perform and coordinate mechanical repairs and preventative maintenance to automated packaging, material handling, and building equipment and machinery. Mechanical Aptitude, including experience with industrial autom...

Promoted
Tech Tammina
Detroit, Michigan

Position: Maintenance Technician. Perform preventative maintenance tasks on machinery and systems. Minimum of 4 years of hands-on experience in maintenance within an industrial environment. Proficient in electrical troubleshooting and repair techniques. ...

Promoted
Huron-Clinton Metroparks
Brownstown Charter Township, Michigan

GENERAL STATEMENT OF DUTIES: Work activities in this position primarily involve the maintenance of the park golf course. Ability to get along with co-workers, supervisors, and park visitors. ...

Promoted
Presbyterian Villages of Michigan
Detroit, Michigan

Inspect grounds, facilities, and equipment routinely to determine the necessity of repairs or maintenance. Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, and the physical condition of buildings does not deteriorate. Requ...

Promoted
Marriott International Inc
Detroit, Michigan

Guest Room Preventative Maintenance, Open availability. Communicate with guests/customers to resolve maintenance issues. Perform preventative maintenance on tools and equipment, including cleaning and lubrication. Maintain maintenance inventory and requisition parts and supplies as needed. ...

Promoted
Champion Foods
Detroit, Michigan

The Maintenance Technician I position provides general electrical/mechanical support to the facility in the areas of manufacturing equipment maintenance and repair, and facility/utility maintenance and repair. The Maintenance Technician I employs a positive, professional attitude at all times and co...

ICONMA
Detroit, Michigan

Possess a general level of technical understanding related to maintenance, time based maintenance (TBM), condition based maintenance (CBM), and dynamic maintenance (DM). Work with skilled trades staff in driving waste reduction efforts through implementation of methods / processes of the World Class...